Farallon NetLINE Setup Manual - page 5
5
NetLINE
™
Setup Guide
Client connection
Wired network clients
1. Open the web browser on a computer connected to the
local wired network. Internet access may be temporarily
unavailable. In the Address or Location box, enter
http://192.168.0.1
and hit return.
2. The
Home
screen of the NetLINE Wireless Broadband
Gateway web utility will appear.
To change or verify the default configuration of the NetLINE
Wireless Broadband Gateway, see
page 6
.
Wireless network clients
1. Follow your wireless PC card’s instructions for connecting to a
wireless access point. Some cards (like the AirPort or the SkyLINE
card) will automatically find the NetLINE Wireless Broadband
Gateway if it is the only wireless access point on the network.
You may be required to configure the wireless PC card with this
information about the NetLINE Wireless Broadband Gateway:
SSID:
enter
default
Mode:
enter
Infrastructure mode
WEP:
By default,WEP is disabled. See the complete NetLINE Wireless
Broadband Gateway user guide for WEP instructions.
2. Open the web browser on the wireless computer. Internet access
may be temporarily unavailable. In the Address or Location box,
enter
http://192.168.0.1
and hit return.
3. The
Home
screen of the NetLINE Wireless Broadband Gateway
web utility will appear.
To change or verify the default configuration of the NetLINE
Wireless Broadband Gateway, see
page 6
.
3
connecting
client
computers
The web utility allows you to configure the NetLINE Wireless Broadband Gateway using a browser such as Netscape Navigator or
Microsoft Internet Explorer. The NetLINE Wireless Broadband Gateway’s default configuration may work with your network, allowing
your client computers to connect to the Internet without further configuration, but it is recommended that you verify the Local Network
and Broadband Network Port configurations as described in this setup guide.
6150270-00-02 4/3/01 12:46 PM Page 5