Summary of FSN100
Page 1
Use & care instructions steam & dry iron fsn100 special select.
Page 2: Important Safeguards
1 important safeguards when using your iron, basic safety precautions should always be followed, including the following: 1. Read all instructions before using. 2. Use iron only for its intended use. 3. To protect against the risk of electric shock, do not immerse the iron in water or other liquids....
Page 3: Farberware
1. Water fill hole 2. Spray nozzle 3. Variable steam dial 4. Spray button 5. Burst of steam button 6. Auto shut-off light and reset button 7. Pivot cord 8. Power on/ready light 9. Temperature control dial 10. See-through water tank (reservoir) 11. Non-stick soleplate 2 6. 7. 5. 4. 3. 2. 1. 8. 10. 9....
Page 4: Temperature and Steam Guide
Using your iron note: before you use your iron for the first time, you should flush the soleplate steam vents to ensure that no stain is transferred onto fabric from residue possibly left in the vents from the manufacturing process. To do that, see self-cleaning/flushing. Temperature and steam guide...
Page 5
4 for best results • check garment labels for the temperature and steam setting recommended by the fabric manufacturer. • to prevent damaging garments from too hot of an iron, it is best to first iron garments that require a low temperature. If you should need to switch from a high setting to a lowe...
Page 6: Proper Temperature.
Steam min 5 ironing without steam the iron can be used with or without water in the tank. However, it is best to avoid having the tank too full of water while ironing without steam. 1. Position temperature control dial to the lowest min setting. 2. Turn the variable steam dial to no steam. 3. Stand ...
Page 7: Allow Iron to Reheat.
6 6 ironing with steam when using as a steam iron, be sure the temperature setting on the temperature control dial is within the steam range to avoid water spotting on a garment. 1. Position temperature control dial to the lowest min setting. 2. Turn the variable steam dial to no steam. 3. With the ...
Page 8: Spraying Action.
7 using the spray button for a mist of water to moisten dry and difficult fabrics such as linen, cotton or wool, or to handle stubborn wrinkles, press the spray button . The spray function is also handy to moisten creases accidentally ironed into the fabric. Note: you may have to pump the spray butt...
Page 9
8 filling the water tank 1. Unplug the iron before filling. 2. Turn the variable steam dial to no steam setting. 3. Hold the iron upright but slightly tipped.. 4. Using a measuring cup, slowly pour water into the water tank opening. 5. Check see-through water tank to see if iron is filled to maximum...
Page 10
9 self-cleaning/flushing flushing the iron is advised after every 5 uses to prevent harmful mineral build-up that can clog the iron and prevent it from heating and steaming properly. 1. Position temperature control dial to the lowest min setting. 2. Turn the variable steam dial to no steam. 3. Fill ...
Page 11
10 to clean soleplate the iron should be fully cooled before soleplate cleaning begins. Make sure the iron is unplugged before cleaning. Empty the water tank of any remaining water. Apply a small amount of mild cleaner to a damp cloth. Gently rub soleplate, then wipe with a moist cloth. Never use sc...
Page 12: One-Year Limited Warranty
One-year limited warranty this farberware® product warranty extends to the original consumer purchaser of the product. Warranty duration: this product is warranted to the original consumer purchaser for a period of one (1) year from the original purchase date. Warranty coverage: this product is warr...