Fargo FP3320BG Set-up And Maintenance Instructions Sheet

Fargo

®

Set-Up and Maintenance Instructions Sheet

Figure 1

1.  Carefully remove from 

package.

Figure 2

ELECTRICAL  REQUIREMENTS

Table fan requires a grounded electrical supply line of 

120 volts AC, 60 Hz, 15 amp circuit.  8 ft power cord 

included.  

NOT for Damp Location Use.

Set Up:

2.  Plug directly into the 

socket.

Figure 3

3.  Select the desired airflow, 

located on back of fan base by 

rotating switch clockwise

Maintenance — To Clean Your Fan:

Periodic cleaning of your new fan is the only maintenance 

that is needed.

When cleaning, use only a soft brush or lint free cloth to 

avoid scratching the   nish.

Abrasive cleaning agents are not required and should be 

avoided to prevent damage to   nish.

CAUTION

Do  not  use  water  when  cleaning  your  fan.  It  could 

damage the motor or the finish and create the possibility 

of electrical shock. 

▲WARNING

To Avoid Fire Or Electrical Shock, Do NOT Use This Fan 

With Any Solid-State Speed Control Device And Do NOT 

Use By Open Window.