Fargo Maestro 100 User Manual - Table of Contents

Other manuals for Maestro 100: User Manual, Setup Manual
Manual is about: GSM GPRS Modem 900/1800

Summary of Maestro 100

  • Page 1

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. Gsm gprs modem 900 / 1800 value added feature user manual.

  • Page 2

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. Revision history rev. Date details originated by 0.9 22july 2005 first release wallace lee 0.91 22feb 2006 - remove at command history feature - remote at command : when enabled all incoming sms will be erased...

  • Page 3: Table of Contents

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 1 eral table of contents 1. Introduction..................................................................................................................................................................... 2 2...

  • Page 4

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 2 1. Introduction the fargo maestro value-added feature package is a software solution for fargo maestro modem (*see note 1). New functions added are to increase application range of various industrial and aut...

  • Page 5

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 3 then enter the following and see the responses according to the following table: command expected response at#vversion #version: "edsoft-w302_v2.10 116686 dec 10 2003 12:20:17" at+wopen=2 +wopen: 2,"at v02.1...

  • Page 6

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 4 e. When you see the dialog box, on the “filename” you choose file according to the modem: fargo maestro 20 : f100vaf_0092.Dwl fargo maestro 100 : f20vaf_0092.Dwl then on “protocol” choose “1k-xmodem”, then p...

  • Page 7

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 5 3. Auto tcp/udp connection (fargo maestro 100 only) the auto tcp/udp connection feature is defined for accessing serial devices over the internet. Fargo maestro can be configured that after power up it will ...

  • Page 8

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 6 3.2 at commands for auto tcp/udp 3.2.1 at+autotcp description: this command controls the maestro 100 to start tcp socket connection automatically. Note: - before using at+autotcp tcp and gprs settings must b...

  • Page 9

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 7 - if the tcp connection is broken the modem will try to reconnect automatically. During re- connection period serial port will go back to command mode, and dsr/dcd signal back to low. - the setting will be s...

  • Page 10

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 8 mode of tcp operation. Default value is “s”. “s” server (listening) mode. This configures fargo maestro to open a listening tcp connection on the specified port . The tcp connection will be active upon getti...

  • Page 11

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 9 command possible responses: at+autoudp=0 ok note : disable autoudp at+autoudp=1 ok note: enable autoudp at+ autoudp? +autoudp : 1 ok note: display current status at+autoudp=? +autoudp : (0-1) note : possible...

  • Page 12

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 10 command possible responses: at+ ipudp? +ipudp: 0,"s","",100 ok note : show current settings at+ ipudp =23 ok note: set the udp port to 23 at+ ipudp =23,”c”,202.144.111.222”,100 ok note: to set the modem to ...

  • Page 13

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 11 3.2.5 at+ipgprs description: this command is used to setup gprs network parameters for the autotcpudp feature. Syntax: command syntax at+ipgprs=,,, response syntax +ipgprs: ,,, command possible responses: a...

  • Page 14

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 12 3.2.6 at+ipbuff description: this command specifies the number of bytes of data from remote peer buffered inside the modem. - if the quantity of buffered data reach this value, the whole buffered data will ...

  • Page 15

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 13 defined values : the number of bytes of data to be buffered. Default value is 0 (i.E. No buffering). Valid range is 0 to 50. Notes: - if the tcp or udp socket connection is broken, buffered data will be los...

  • Page 16

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 14 4. Remote at command by sms this feature is to control the modem to interpret at command from incoming sms, executing it, and return the result to sender by sms. The user can enable the modem to receive at ...

  • Page 17

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 15 4.2 at command for configuring at command by sms 4.2.1 at+smsat command syntax at+smsat=(,) response syntax: +smsat: , command possible responses: at+smsat=0 ok note : disable remote at command by sms at+ s...

  • Page 18

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 16 4. It could be in some case (e.G. Network failure) the modem cannot return response sms. The modem will try sending response sms for three times max. If still not successful it will abort. 5. Always think t...

  • Page 19

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 17 5. I/o triggered at command this feature making use of the fargo maestro input/output port as a sensor. If the signal to the port match the pre-defined condition a stored at command will be executed. User c...

  • Page 20

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 18 when set as high-to-low triggering : * see at+ioat command on setting threshold value t. 5.2 at command for configuring i/o triggered at command 5.2.1 at+ioat command syntax at+ioat=(,,, ) response syntax: ...

  • Page 21

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 19 time required for the detected state to trigger the at command exestuation. Unit is in millisecond. Valid value from 1 to 50 (0.1 sec to 5 sec). Refer to the above timing diagram in section 5.1. At command ...

  • Page 22: 6.1 At+Wind Command

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 20 6. Known issues the fargo maestro value added feature will affect certain other at commands’ operation. Please note : 6.1 at+wind command 1. At+wind command will be disabled (fargo maestro 100 only) 6.2 sav...

  • Page 23

    Confidential, the whole present document is the sole property of fargo telecom (asia) ltd. 21 7. Questions and answers 7.1 installation q. If my fargo maestro cannot match with the requirement stated in section 2.1, can i upgrade it? A. No. Older fargo maestro cannot be upgraded. Q. Can i have the t...