Farm King 500 Operator And Parts Manual - page 8

8

Safety - 500 & 600 Snowblower

Installation

• To install safety signs, ensure the installation area is clean and dry. Decide on the exact 

position before you remove the backing paper. Remove the smallest portion of the split 

backing paper and align over the specified area. Carefully press in place.

• Slowly peel back the remaining paper and smooth the remaining portion in place. Small air 

pockets can be pierced with a pin and smoothed out.

• Replace safety signs immediately should they become damaged, torn or illegible. Obtain 

replacements from your authorized dealer using the part numbers shown.

2

1

3

SERIAL 

NUMBER

3

1

2

3