Farm King 960 Operator And Parts Manual - page 8
of
28
8
Installation of Safety Signs
To install safety signs, ensure the installation area is clean and dry. Decide on the exact position
before you remove the backing paper. Remove the smallest portion of the split backing paper and
align over the specified area. Carefully press in place. Slowly peel back the remaining paper and
smooth the remaining portion in place. Small air pockets can be pierced with a pin and smoothed
out.
Safety - 960 Snowblower
Replace safety signs immediately
should they become damaged, torn
or illegible. Obtain replacements from
your authorized dealer using the part
numbers shown.