High velocity air circulator model: ul#e144918 owner’s manual read&save these instructions.
High velocity air circulator assembly and operating instructions caution: read and follow all instructions before operating fan. Do not use fan if any part is damaged or missing. Warning: to reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device. T...
Assembly instructions 1. Remove five hexagonal screws from base, save them for step 2. 2. Attach support post to base by tightening back the five hexagonal screws from step 1 and slide coupler cover onto base. 3. Slide shock absorbent spring into support post. 4. Loosen height adjustment knob and re...
6. Adjust extension pipe to your desired height and secure it by tightening back the height adjustment knob. 7. Remove tilt adjustment knob and hexagonal bolt from the top of the extension pipe, then remove the large hexagonal bolt, nut, spring washer from the top of the extension pipe. Save them fo...
11. Install fan blade assembly onto motor shaft by tightening the set screw on blade assembly to the sunken space on motor shaft. Make sure set screw is tightly secured by a philips-head screw driver (not provided). 12. Assembly front guard to rear guard by fixing both guards together with clips on ...
The motor bearings are permanently lubricated at the factory and do not require any additional lubrication. Cleaning warning: unplug from electrical supply source before cleaning. After servicing, any safety device (including grills and blades) must be reinstalled or remounted as previously installe...
