1. DL manuals
  2. Faro
  3. Measuring Instruments
  4. FOCUS3D X 130
  5. User Manual

Faro FOCUS3D X 130 User Manual

Summary of FOCUS3D X 130

  • Page 1

    Faro l aser s canner f ocus 3d x 130 f ebruary 2014.

  • Page 2

    ©faro technologies inc., 2014. All rights reserved. No part of this publication may be reproduced, or transmitted in any form or by any means without written permission of faro technologies, inc. Faro technologies, inc. Makes no warranty, either express or implied, including but not limited to any i...

  • Page 4: Table of Contents

    Faro ® laser scanner focus 3d x 130 manual january 2014 i table of contents chapter 1: introduction..............................1 chapter 2: equipment................................7 chapter 3: safety precautions and maintenance ..............................................9 general safety inform...

  • Page 5: Chapter 6: The Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 ii sd memory card ........................................................... 31 preparing a sd memory card.......................................................31 inserting the sd memory card......................................................

  • Page 6

    Faro ® laser scanner focus 3d x 130 manual january 2014 iii navigation bar ................................................................................62 frequently used buttons ................................................................64 onscreen keyboard.....................................

  • Page 7

    Faro ® laser scanner focus 3d x 130 manual january 2014 iv view scans ................................................................... 102 online help................................................................... 104 chapter 7: technical data ....................107 general.....................

  • Page 8: Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 v expert opinion - classification of the focus 3d x 130 according to iec 60825-1 ed. 2.0 ......................................................... E-23 implementation notes ......................... F-27 trademarks ................................

  • Page 9

    Faro ® laser scanner focus 3d x 130 manual january 2014 vi.

  • Page 10

    Faro ® laser scanner focus 3d x 130 manual january 2014 1 chapter 1: introduction chapter 1: introduction the faro ® laser scanner focus 3d x 130 is a high-speed three-dimensional laser scanner for detailed measurement and documentation. The focus 3d x 130 uses laser technology to produce exceedingl...

  • Page 11

    Faro ® laser scanner focus 3d x 130 manual january 2014 2 chapter 1: introduction the main features are: • hypermodulation tm • high accuracy • high resolution • high speed • intuitive control via the built in touchscreen display. • high mobility due to its small size, light weight, and the integrat...

  • Page 12

    Faro ® laser scanner focus 3d x 130 manual january 2014 3 chapter 1: introduction to measure the distance, focus 3d x 130 uses phase shift technology, where constant waves of infrared light of varying length are projected outward from the scanner. Upon contact with an object, they are reflected back...

  • Page 13

    Additionally, the focus 3d x 130 determines the reflectivity of the captured surfaces by measuring the intensity of the received laser beam. In general, bright surfaces reflect a greater portion of the emitted light than do dark surfaces. This reflectivity value is used to assign a corresponding gre...

  • Page 14

    Faro ® laser scanner focus 3d x 130 manual january 2014 5 chapter 1: introduction the scanner also has an onscreen help that can be accessed during operation by pressing the help button on the screen. For more information, see “online help” on page 104. A list of the potential fields of application ...

  • Page 15

    Faro ® laser scanner focus 3d x 130 manual january 2014 6 chapter 1: introduction.

  • Page 16: Recommended Equipment:

    Faro ® laser scanner focus 3d x 130 manual january 2014 7 chapter 2: equipment chapter 2: equipment the focus 3d x 130 is shipped with the following standard equipment: scanner transport and carry case ac power cable external power supply unit with cable powerblock battery memory card case usb memor...

  • Page 17

    Faro ® laser scanner focus 3d x 130 manual january 2014 8 chapter 2: equipment • spare battery • powerdock charging cradle retain all packing materials as you may need them later. The sd memory card, a charged powerblock battery or the external power supply unit with ac power cable, and a tripod are...

  • Page 18: General Safety Information

    Faro ® laser scanner focus 3d x 130 manual january 2014 9 chapter 3: safety precautions and maintenance chapter 3: safety precautions and maintenance general safety information • please read this user's manual carefully and completely and refer to it before using the product. Pay close attention to ...

  • Page 19: Servicing

    Faro ® laser scanner focus 3d x 130 manual january 2014 10 chapter 3: safety precautions and maintenance • before operating the focus 3d x 130 and its accessories in hazardous areas, please contact the local safety authorities and safety experts. • for outdoor use, please use the powerblock battery ...

  • Page 20

    Faro ® laser scanner focus 3d x 130 manual january 2014 11 chapter 3: safety precautions and maintenance touch dangerous voltage points or cause short circuits. This could result in a fire, electric shock, and damage to the product. • this product should be operated only from the power source or the...

  • Page 21: Laser Safety

    Faro ® laser scanner focus 3d x 130 manual january 2014 12 chapter 3: safety precautions and maintenance • dispose of batteries in accordance with environmental regulations. Contact your local waste disposal management authority for guidelines concerning lithium ion batteries. Powerdock battery char...

  • Page 22: Mechanical Security

    Faro ® laser scanner focus 3d x 130 manual january 2014 13 chapter 3: safety precautions and maintenance in accordance with iec 60825-1:2007, the focus 3d x 130 is equipped with the following explanatory label: mechanical security • warning: the mirror unit rotates with high speed while scanning and...

  • Page 23: Transport

    Faro ® laser scanner focus 3d x 130 manual january 2014 14 chapter 3: safety precautions and maintenance transport • when carrying the focus 3d x 130, take care not to drop it. Strong impact may damage the focus 3d x 130 and render it incapable of proper operation. • carry the focus 3d x 130 separat...

  • Page 24: Maintenance

    Faro ® laser scanner focus 3d x 130 manual january 2014 15 chapter 3: safety precautions and maintenance maintenance general it is recommended that you check your focus 3d x 130 at least once a month. This enables you to spot trouble before it starts and helps provide you with an efficient measuring...

  • Page 25: What'S Needed:

    Faro ® laser scanner focus 3d x 130 manual january 2014 16 chapter 3: safety precautions and maintenance • only use cleaning fluid without alcohol or acetone to clean the optics. We recommend alcohol-free lens cleaner that can be found in most optical supply stores. • in the event acetone accidental...

  • Page 26: Greatly Contaminated Mirror

    Faro ® laser scanner focus 3d x 130 manual january 2014 17 chapter 3: safety precautions and maintenance • mist the clamped lens tissues with the cleaning fluid (do not soak). If necessary, wait a few seconds until some of the solution has evaporated. • bring the scanner mirror into position and hol...

  • Page 27: Cleaning The Receiver Lens

    Faro ® laser scanner focus 3d x 130 manual january 2014 18 chapter 3: safety precautions and maintenance cleaning the receiver lens see “cleaning instructions for optics” on page 15. Use only alcohol free cleaning fluids! Do not touch the mirror or the receiver lens with your hands, tweezers or forc...

  • Page 28: Scanner

    Faro ® laser scanner focus 3d x 130 manual january 2014 19 chapter 4: parts and their functions chapter 4: parts and their functions scanner right side (display / mirror side) power button - press this button to power on the focus 3d x 130. If the focus 3d x 130 is on and running, press this button ...

  • Page 29: Inside The Cover

    Faro ® laser scanner focus 3d x 130 manual january 2014 20 chapter 4: parts and their functions inside the cover sd card slot micro usb port - without function yet; reserved for future use. Figure 4-2 sd memory card slot.

  • Page 30

    Faro ® laser scanner focus 3d x 130 manual january 2014 21 chapter 4: parts and their functions left side (battery / sensor side) battery cover with fcc compliance statement on the inside. Battery compartment battery fastener - push the fastener to release the battery. Led sensor side figure 4-3 sen...

  • Page 31: Front

    Faro ® laser scanner focus 3d x 130 manual january 2014 22 chapter 4: parts and their functions front scanner mirror - for safety and cleaning instructions see “mechanical security” on page 13 and “cleaning instructions for optics” on page 15. Scanner mount - see figure 4-5 for more information. Led...

  • Page 32: Bottom

    Faro ® laser scanner focus 3d x 130 manual january 2014 23 chapter 4: parts and their functions bottom 3/8” screw thread to mount the scanner to standard photo tripods. M5 screw threads to mount the scanner to customer specific fixtures. Pin hole (diameter 8 mm) for scanner adjustment. Pin hole (dia...

  • Page 33

    Faro ® laser scanner focus 3d x 130 manual january 2014 24 chapter 4: parts and their functions powerdock battery charging cradle power socket bearing area for the battery leds (see figure 4-7) connectors power led (led 1) - indicates that power is connected to the powerdock. Leds 2 to 5 - indicate ...

  • Page 34: Charge Level

    Faro ® laser scanner focus 3d x 130 manual january 2014 25 chapter 4: parts and their functions led behavior in case of errors: charge level led behavior 0 - 25% led 2 is blinking blue, others are off 25 - 50% led 2 is illuminating blue, led 3 is blinking blue, leds 4 & 5 are off 50 - 75% leds 2 & 3...

  • Page 35: X 130

    Faro ® laser scanner focus 3d x 130 manual january 2014 27 chapter 5: getting started chapter 5: getting started this chapter will provide preliminary steps and basic focus 3d x 130 operations and will guide you step-by-step from setting up the focus 3d x 130 to recording your first scan. Charging t...

  • Page 36: Tips For Using The Battery

    Faro ® laser scanner focus 3d x 130 manual january 2014 28 chapter 5: getting started tips for using the battery • charge the battery the day it is to be used or on the day before. A charged battery unused will gradually lose power over time. • if the battery becomes exhausted quickly after being fu...

  • Page 37: Setting Up The Tripod

    Faro ® laser scanner focus 3d x 130 manual january 2014 29 chapter 5: getting started position until it snaps into place. Make sure that the battery's pins are in contact with the charger's terminals. 4 charging starts automatically as soon as the battery has been inserted into the charger; leds 2 t...

  • Page 38: Mounting The Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 30 chapter 5: getting started in extreme windy conditions, please make sure that the tripod has a stable standing. For this, you should affix a heavy weight to the tripod or sandbag its feet. Mounting the focus 3d x 130 to mount the focus 3d x ...

  • Page 39: Sd Memory Card

    Faro ® laser scanner focus 3d x 130 manual january 2014 31 chapter 5: getting started 6 the scanner should be set up as horizontally as possible. The levelling may be refined using the integrated dual axis compensator. See “inclinometer (dual axis compensator)” on page 96. Please see the user manual...

  • Page 40: Inserting The Sd Memory Card

    Faro ® laser scanner focus 3d x 130 manual january 2014 32 chapter 5: getting started it is safe to remove the card from the scanner when this icon has disappeared from the status bar. Caution: when removing a focus 3d x 130 sd card from your computer, you should always use the “safely remove hardwa...

  • Page 41: Powering The Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 33 chapter 5: getting started powering the focus 3d x 130 the focus 3d x 130 can be operated with the battery and the external power supply unit. Supplying power with the battery adhere to the battery safety measures (“powerblock battery safety...

  • Page 42

    Faro ® laser scanner focus 3d x 130 manual january 2014 34 chapter 5: getting started supplying power with the external power supply unit 1 attach the power supply to one of the tripod's legs. 2 connect the power supply unit cable to the power socket of the focus 3d x 130. Confirm the direction of t...

  • Page 43: Switching The Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 35 chapter 5: getting started forcibly insert the plug in a wrong direction, the plug, the scanner's power socket as well as the scanner can be damaged. 3 connect the ac power cable to the power supply as well as to a power outlet. Check the in...

  • Page 44: Initial Scanner Settings

    Faro ® laser scanner focus 3d x 130 manual january 2014 36 chapter 5: getting started when the focus 3d x 130 is ready, the leds will stop blinking and will illuminate constantly blue, the home screen of the scanner's controller software will appear on the integrated touch screen. The focus 3d x 130...

  • Page 45

    Faro ® laser scanner focus 3d x 130 manual january 2014 37 chapter 5: getting started setting the interface language starting from the home screen, go to home > manage > general settings > language to change the language of the controller software. Select the language by touching the corresponding b...

  • Page 46: Setting The Date and Time

    Faro ® laser scanner focus 3d x 130 manual january 2014 38 chapter 5: getting started setting the date and time to change the date and time settings, go to home > manage > general settings > date & time. Time format - click to set the time format. The controller software will show the time either us...

  • Page 47: Setting The Date Format

    Faro ® laser scanner focus 3d x 130 manual january 2014 39 chapter 5: getting started setting the date format select the date format by touching the corresponding button. You can select between the date formats dd.Mm.Yyy, mm/dd/yyyy or yyyy-mm-dd, where yyyy is the year, dd the day and mm the month....

  • Page 48

    Faro ® laser scanner focus 3d x 130 manual january 2014 40 chapter 5: getting started proceed accordingly with the month and the day buttons. Discard changes - click to discard your changes. Leaving the view with the back or home button applies your changes. A message will be displayed, informing yo...

  • Page 49: Entering Scanner Information

    Faro ® laser scanner focus 3d x 130 manual january 2014 41 chapter 5: getting started entering scanner information you can specify a scanner name and the owner of the focus 3d x 130. Starting from the home screen, go to home > manage > general settings > scanner details. Scanner name - click to chan...

  • Page 50

    Faro ® laser scanner focus 3d x 130 manual january 2014 42 chapter 5: getting started to choose a predefined scan profile or to change the scanning parameters push the parameters button on the home screen. Selected profile - shows the name of the selected scan profile. Click to select a scan profile...

  • Page 51: Selecting A Scan Profile

    Faro ® laser scanner focus 3d x 130 manual january 2014 43 chapter 5: getting started scan size [pt] - shows the size of the scan in points horizontally x vertically. The vertical size may only be changed by setting a new resolution or by changing the scan area angle. Scan duration, scan file size -...

  • Page 52

    Faro ® laser scanner focus 3d x 130 manual january 2014 44 chapter 5: getting started setting resolution and quality (home > parameters > resolution / quality) resolution - the resulting scan resolution. You can choose among 1/1, 1/2, 1/4, 1/5, 1/8, 1/10, 1/16, 1/20 and 1/32. Use the slider on the l...

  • Page 53: Setting The Scan Range

    Faro ® laser scanner focus 3d x 130 manual january 2014 45 chapter 5: getting started setting the scan range (home > parameters> horizontal / vertical) vertical area - the size of the vertical scan area in degrees. Use the left up and down buttons to change the vertical start angle, use the right up...

  • Page 54: Selecting The Sensors

    Faro ® laser scanner focus 3d x 130 manual january 2014 46 chapter 5: getting started selecting the sensors (home > parameters > select sensors) use inclinometer - enable or disable the automatic use of the inclination measurement of the built-in dual axis compensator (inclinometer) for the scan reg...

  • Page 55: Color Settings

    Faro ® laser scanner focus 3d x 130 manual january 2014 47 chapter 5: getting started use gps - turn the gps sensor on or off. Unlike the other sensors, the gps data is only recorded during scanning and will thus only be available for scan registration in scene if this button is switched to on. For ...

  • Page 56

    Faro ® laser scanner focus 3d x 130 manual january 2014 48 chapter 5: getting started giving special weighting to a particular area. Use this setting in scenarios with even lighting conditions. Horizon weighted metering - with horizon weighted metering mode, the camera will use the light information...

  • Page 57

    Faro ® laser scanner focus 3d x 130 manual january 2014 49 chapter 5: getting started a value to the center of the remaining vertical scan area. The following figures illustrate this behavior. Figure 5-24 shows the exposure metering area (highlighted yellow) for the full vertical scan area; figure 5...

  • Page 58: Advanced Settings

    Faro ® laser scanner focus 3d x 130 manual january 2014 50 chapter 5: getting started historical buildings). Compared to even weighted metering, this mode will increase scan duration by approximately 14 seconds. Advanced settings (home > parameters > advanced settings) clear contour - enables the dy...

  • Page 59: Scanning Parameters Overview

    Faro ® laser scanner focus 3d x 130 manual january 2014 51 chapter 5: getting started clear sky - enables the dynamic sky filter. While scanning, this hardware filter will remove scan points resulting from hitting no objects at all which mainly happens when scanning the sky. Far distances optimizati...

  • Page 60: Targets

    Faro ® laser scanner focus 3d x 130 manual january 2014 52 chapter 5: getting started enhancing the scanned environment with artificial targets before scanning, you should make sure that there will be enough reference objects in the scans so that there will be no problems during the later registrati...

  • Page 61: General

    Faro ® laser scanner focus 3d x 130 manual january 2014 53 chapter 5: getting started scanned environment with additional artificial reference objects, like spheres or checkerboard paper targets. Spheres and paper targets can be combined within a scan site. Usually you will achieve more precise regi...

  • Page 62: Checkerboard Targets

    Faro ® laser scanner focus 3d x 130 manual january 2014 54 chapter 5: getting started • when capturing a chain of scans resulting in a tubular point cloud which is typical for e.G. Tunnel surveying, it is recommended to make use of the inclination sensor and references with surveyed coordinates. Suc...

  • Page 63: Environmental Conditions

    Faro ® laser scanner focus 3d x 130 manual january 2014 55 chapter 5: getting started environmental conditions • when the product is transferred from a cold to a significantly warmer environment, water may condense on some elements inside the scanner. To avoid this, we recommend placing the scanner ...

  • Page 64

    Faro ® laser scanner focus 3d x 130 manual january 2014 56 chapter 5: getting started the scan process starts, the laser of the scanner will be switched on and the scanning view will be displayed. The scanner's leds are blinking red as long as the laser of the scanner is switched on. During scanning...

  • Page 65: Delete Button

    Faro ® laser scanner focus 3d x 130 manual january 2014 57 chapter 5: getting started a preview picture of the captured scan. Now, you may move the scanner to the next scan position and start a new scan the scan preview shows a grayscale picture of the captured scan to verify the scan itself and to ...

  • Page 66: Shutting Down The Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 58 chapter 5: getting started the inclinometer screen. For more information, see “inclinometer (dual axis compensator)” on page 96. Shutting down the focus 3d x 130 to shut down the focus 3d x 130, shortly press its on/off button or use the shu...

  • Page 67: X 130 By Pulling

    Faro ® laser scanner focus 3d x 130 manual january 2014 59 chapter 5: getting started unplugging the power supply unit take care to unplug the bend connector from the focus 3d x 130 by pulling at the connector only! Do not pull at the cable or you might damage the connector and the focus 3d x 130! F...

  • Page 68

    Faro ® laser scanner focus 3d x 130 manual january 2014 60 chapter 5: getting started.

  • Page 69: General Elements

    Faro ® laser scanner focus 3d x 130 manual january 2014 61 chapter 6: the focus 3d x 130 controller software chapter 6: the focus 3d x 130 controller software general elements status bar current view - the name of the currently active and visible screen on the display. Battery icon - shows the statu...

  • Page 70: Navigation Bar

    Faro ® laser scanner focus 3d x 130 manual january 2014 62 chapter 6: the focus 3d x 130 controller software focus 3d x 130. If the charge state of the battery reaches 10 percent the focus 3d x 130 will stop scanning and will automatically shut down. Clock - shows the current time of the focus 3d x ...

  • Page 71

    Faro ® laser scanner focus 3d x 130 manual january 2014 63 chapter 6: the focus 3d x 130 controller software home button - returns you to the home screen. See “home screen” on page 66..

  • Page 72: Frequently Used Buttons

    Faro ® laser scanner focus 3d x 130 manual january 2014 64 chapter 6: the focus 3d x 130 controller software frequently used buttons add button. Adds new scan profiles, projects or operators. Duplicate button. Adds new scan pro- files, projects or operators by duplicat- ing the selected list element...

  • Page 73: Onscreen Keyboard

    Faro ® laser scanner focus 3d x 130 manual january 2014 65 chapter 6: the focus 3d x 130 controller software onscreen keyboard shift key to toggle between capital and lower case letters key to toggle keyboard between standard and special characters moves the cursor in the text field right or left de...

  • Page 74: Home Screen

    Faro ® laser scanner focus 3d x 130 manual january 2014 66 chapter 6: the focus 3d x 130 controller software finger a bit to the right or to the left. The selected character will be highlighted (see figure 6-4) . Home screen start scan button - starts a scan. See “starting a scan” on page 55. Parame...

  • Page 75: Manage

    Faro ® laser scanner focus 3d x 130 manual january 2014 67 chapter 6: the focus 3d x 130 controller software manage button - manage scan profiles, projects, operators and the scanner. See “manage” on page 67. Click the arrow button beneath the navigation bar to show or hide the info box. The info bo...

  • Page 76: Managing Scan Projects

    Faro ® laser scanner focus 3d x 130 manual january 2014 68 chapter 6: the focus 3d x 130 controller software projects - select the current scan project, add new or edit existing projects (see “managing scan projects” on page 68). Click to get a list of all available projects. Profiles - select the c...

  • Page 77

    Faro ® laser scanner focus 3d x 130 manual january 2014 69 chapter 6: the focus 3d x 130 controller software once the project structure has been created, assign the single scans to the corresponding clusters: to do this, select a scan project from the projects list that has been prepared by you in a...

  • Page 78: Creating A Scan Project

    Faro ® laser scanner focus 3d x 130 manual january 2014 70 chapter 6: the focus 3d x 130 controller software creating a scan project this view shows a list of all available scan projects. The „default project“ is a standard project that may be selected when working in no particular scan project. The...

  • Page 79

    Faro ® laser scanner focus 3d x 130 manual january 2014 71 chapter 6: the focus 3d x 130 controller software soon as you make changes to it or as soon as a scan has been started. If the new sd card contains projects too, they will be added to the projects list. Project name - the name of the project...

  • Page 80: Editing A Scan Project

    Faro ® laser scanner focus 3d x 130 manual january 2014 72 chapter 6: the focus 3d x 130 controller software no parent project - select this button if the project is supposed to be a main project with no parent project. Customer - if you are carrying out the scan project by order of a company, you c...

  • Page 81: Managing Scan Profiles

    Faro ® laser scanner focus 3d x 130 manual january 2014 73 chapter 6: the focus 3d x 130 controller software to select a project, click its button in the list. The selected project will be highlighted and marked with a check mark. To view or change details of the selected project, touch its button o...

  • Page 82: Creating A Scan Profile

    Faro ® laser scanner focus 3d x 130 manual january 2014 74 chapter 6: the focus 3d x 130 controller software creating a scan profile as already mentioned, the focus 3d x 130 comes with factory predefined scan profiles (see “factory predefined scan profiles overview” on page 75 for an overview of the...

  • Page 83: Editing A Scan Profile

    Faro ® laser scanner focus 3d x 130 manual january 2014 75 chapter 6: the focus 3d x 130 controller software to delete a custom scan profile, select it and click the delete button. You cannot delete factory predefined profiles. Profile name - name of the scan profile. Click to change it. The further...

  • Page 84: Managing Operators

    Faro ® laser scanner focus 3d x 130 manual january 2014 76 chapter 6: the focus 3d x 130 controller software factory predefined scan profiles overview managing operators (home > manage > operators) indoor ..10m indoor 10m... Outdoor ...20m outdoor 20m... Preview object hd description scan indoors wh...

  • Page 85: Creating An Operator

    Faro ® laser scanner focus 3d x 130 manual january 2014 77 chapter 6: the focus 3d x 130 controller software the information, which scanner operator has recorded which scans, might be useful for the person who is post processing the scans; especially when there are several scanner operators working ...

  • Page 86: Editing An Operator

    Faro ® laser scanner focus 3d x 130 manual january 2014 78 chapter 6: the focus 3d x 130 controller software to delete an operator, select it and click the delete button. Name - the name of the scanner operator. Company - the name of the company providing the scanning service. Department - the depar...

  • Page 87: Selecting An Operator

    Faro ® laser scanner focus 3d x 130 manual january 2014 79 chapter 6: the focus 3d x 130 controller software selecting an operator select an operator in the list by touching the corresponding button. The selected operator will be highlighted, marked with a check mark and assigned to the next capture...

  • Page 88: Wlan - The Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 80 chapter 6: the focus 3d x 130 controller software power management - set up the screen saver; view the detailed battery charge state and enable or disable start on power which allows the scanner to be turned on by connecting the power supply...

  • Page 89

    Faro ® laser scanner focus 3d x 130 manual january 2014 81 chapter 6: the focus 3d x 130 controller software the scanner has a built in loudspeaker. Certain scanner events will be signaled by various sound effects. You can change their volume here and switch sound effects on or off. Volume - increas...

  • Page 90: Power Management

    Faro ® laser scanner focus 3d x 130 manual january 2014 82 chapter 6: the focus 3d x 130 controller software power management (home > manage > general settings > power management) screensaver - if the screen has not been touched for a certain period of time, a screensaver appears on the screen. Chan...

  • Page 91: Display

    Faro ® laser scanner focus 3d x 130 manual january 2014 83 chapter 6: the focus 3d x 130 controller software display (home > manage > general settings > display) brightness - set the brightness of the screen. Calibrate the display - if you experience the touch screen to be slightly misaligned, you m...

  • Page 92: Units

    Faro ® laser scanner focus 3d x 130 manual january 2014 84 chapter 6: the focus 3d x 130 controller software see “setting the interface language” on page 37. Units (home > manage > general settings > units) see “setting the unit of length and the temperature scale” on page 40. Wlan / connecting to t...

  • Page 93

    Faro ® laser scanner focus 3d x 130 manual january 2014 85 chapter 6: the focus 3d x 130 controller software ip address - the wlan ip address of the scanner. If your remote device is connected to the scanner, enter this address into the address field of your web browser followed by port 8400 (e.G. 1...

  • Page 94: • P

    Faro ® laser scanner focus 3d x 130 manual january 2014 86 chapter 6: the focus 3d x 130 controller software • a list with the available wireless network connections appears. Choose the scanner‘s wlan network in this list (the scanner should be listed with the above mentioned network name) and click...

  • Page 95: Scanner Details

    Faro ® laser scanner focus 3d x 130 manual january 2014 87 chapter 6: the focus 3d x 130 controller software download them to your remote device by simple file operations. Note that copying the files from the scanner via wlan may take a while, depending on connection speed and signal strength. Scann...

  • Page 96: Service

    Faro ® laser scanner focus 3d x 130 manual january 2014 88 chapter 6: the focus 3d x 130 controller software service (home > manage > service) errors & warnings - click to change to another screen to view details of present warnings and errors. Button will not be enabled if there are no warnings or ...

  • Page 97: Errors And Warnings

    Faro ® laser scanner focus 3d x 130 manual january 2014 89 chapter 6: the focus 3d x 130 controller software errors and warnings (home > manage > service > errors & warnings) this view provides a list of present warnings and errors. Click a list item to view details of the corresponding warning or e...

  • Page 98: Sd Card

    Faro ® laser scanner focus 3d x 130 manual january 2014 90 chapter 6: the focus 3d x 130 controller software sd card (home > manage > service > sd card) this view provides information about the currently inserted sd card and its contents. Format card - format the inserted sd card. P lease note : thi...

  • Page 99: Backup

    Faro ® laser scanner focus 3d x 130 manual january 2014 91 chapter 6: the focus 3d x 130 controller software important scanner operations, sensor data as well as warnings and errors will be saved to the log file that can help customer service to identify problems and the cause of possible errors. Ex...

  • Page 100: Restore

    If you own more than one scanner, you can also transfer operators, scan profiles or wallpapers from one scanner to another without the need of entering the data individually. Backup name - click to enter the name of the backup package. Data will be saved to the following directory on your sd card: /...

  • Page 101

    Faro ® laser scanner focus 3d x 130 manual january 2014 93 chapter 6: the focus 3d x 130 controller software restore to this directory. If you use scene to create new or modify backed up data, this will be done automatically by scene. When finished, insert the sd card with the data you want to resto...

  • Page 102: Before Restoring.

    Faro ® laser scanner focus 3d x 130 manual january 2014 94 chapter 6: the focus 3d x 130 controller software p lease note : the restored data will override existing data on the scanner. E.G. If you want to restore or import scan profiles, all the existing scan profiles on the scanner will be overrid...

  • Page 103: Factory Settings

    Faro ® laser scanner focus 3d x 130 manual january 2014 95 chapter 6: the focus 3d x 130 controller software factory settings (home > manage > service > factory settings) this function will reset your scanner settings to factory default. Use this option in exceptional cases only. Your scans, scan pr...

  • Page 104: Temperature Sensors

    Faro ® laser scanner focus 3d x 130 manual january 2014 96 chapter 6: the focus 3d x 130 controller software temperature - click to view the current scanner temperature and to switch the scanner's fan on or off. See “temperature sensors” on page 95. Inclinometer - click to level the scanner. See “in...

  • Page 105

    Faro ® laser scanner focus 3d x 130 manual january 2014 97 chapter 6: the focus 3d x 130 controller software if the temperature is too high or too low, the indicator will be within the red area. In that case, scanning will not be possible anymore and the scanner will shut down within the next minute...

  • Page 106: Compass

    Faro ® laser scanner focus 3d x 130 manual january 2014 98 chapter 6: the focus 3d x 130 controller software and has the same function as the equivalent button in the parameters settings. See “setting the scanning parameters” on page 41. The dual axis compensator is able to detect whether the scanne...

  • Page 107

    Faro ® laser scanner focus 3d x 130 manual january 2014 99 chapter 6: the focus 3d x 130 controller software automatically use the compass data for the scan registration, switch the use compass button to on, else switch it to off. This setting affects the current scanning parameters and has the same...

  • Page 108: Altimeter

    Faro ® laser scanner focus 3d x 130 manual january 2014 100 chapter 6: the focus 3d x 130 controller software altimeter (home > manage > sensors > altimeter) the barometric height sensor (altimeter) determines the altitude of the current scanner position. The altitude determination is based on the m...

  • Page 109: Gps

    Faro ® laser scanner focus 3d x 130 manual january 2014 101 chapter 6: the focus 3d x 130 controller software as the altimeter determines the altitude based on the measurement of the atmospheric pressure, changes in the air pressure caused by changing weather conditions have an effect on the resulti...

  • Page 110

    Faro ® laser scanner focus 3d x 130 manual january 2014 102 chapter 6: the focus 3d x 130 controller software gps information - provides information about the currently measured gps coordinates latitude, longitude and the altitude as well as the utc time of the last satellite contact and the number ...

  • Page 111: View Scans

    Faro ® laser scanner focus 3d x 130 manual january 2014 103 chapter 6: the focus 3d x 130 controller software a limited gps signal can have many different reasons. Like with portable navigation devices, make sure that the scanner always has an unobstructed view of the sky. Obstructions can block the...

  • Page 112

    Faro ® laser scanner focus 3d x 130 manual january 2014 104 chapter 6: the focus 3d x 130 controller software click a scan in the list to see its preview picture. Previous button - shows the preview picture of the previous scan. Next button - shows the preview picture of the next scan. Zoom in butto...

  • Page 113: Online Help

    Faro ® laser scanner focus 3d x 130 manual january 2014 105 chapter 6: the focus 3d x 130 controller software info - click to view the scan properties. A warning or error icon on the button indicates that there was a warning or an error during recording the viewed scan. More information can be seen ...

  • Page 114

    Faro ® laser scanner focus 3d x 130 manual january 2014 106 chapter 6: the focus 3d x 130 controller software the online help provides useful information about the currently active view. Figure 6-43 online help of home screen.

  • Page 115: General

    Faro ® laser scanner focus 3d x 130 manual february 2014 107 chapter 7: technical data chapter 7: technical data general power supply voltage: 19v (external supply) 14.4v (internal battery) power consumption: 40w and 80w (while battery charges) battery life: 4.5 hours ambient temperature: 5° - 40°c ...

  • Page 116: Deflection Unit

    Faro ® laser scanner focus 3d x 130 manual february 2014 108 chapter 7: technical data deflection unit field of view (vertical/horizontal): 300° / 360° step size (vertical/horizontal): 0.009° (40,960 3d-pixel on 360°) / 0.009° (40,960 3d-pixel on 360°) max. Vertical scan speed: 5,820rpm or 97hz lase...

  • Page 117: Ambient Conditions

    Faro ® laser scanner focus 3d x 130 manual february 2014 109 chapter 7: technical data ambient conditions ambient temperature: 5° - 40°c humidity: max. 90 %, non-condensing altitude: the faro ® laser scanner focus 3d x 130 is protected by u.S. Patent 7,869,005. 1 ranging error is defined as a system...

  • Page 118

    Faro ® laser scanner focus 3d x 130 manual february 2014 110 chapter 7: technical data.

  • Page 119: Available Replacement Parts

    Faro ® laser scanner focus 3d x 130 manual january 2014 111 chapter 8: appendix chapter 8: appendix available replacement parts • power supply unit with cable • ac power cable • transport case led behavior led beneath start/ stop button led on mirror side of scanner led on sensor side of scanner led...

  • Page 120: Led Beneath

    Faro ® laser scanner focus 3d x 130 manual january 2014 112 chapter 8: appendix file structure of the sd memory card the file structure of the focus 3d x 130 sd cards is as follows: backup - scanner backups will be saved to this folder. The backup folder will be created automatically as soon as you ...

  • Page 121

    Scans - the captured scans will be saved to this folder. The scans folder will be created automatically as soon as a scan has been started. See “starting a scan” on page 55. Updates - copy firmware updates to this folder. This folder has to be created manually. See “firmware update” on page 94. Faro...

  • Page 122: Focus

    Focus 3d x 130 error messages error message description action internal error: invalid parameter the scanner parameters are inconsistent. Please restart scanner. If the problem still occurs after restart, contact faro cus- tomer service distance measurement tolerance exceeded the white reference are...

  • Page 123: Error Message

    Faro ® laser scanner focus 3d x 130 manual january 2014 115 chapter 8: appendix scanner temperature too low temperature of the scanner is too low. Scanning is not possible. Please warm up the scanner before further use. Temperature too high temperature of the scanner is too high. Scanning is not pos...

  • Page 124: Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 116 chapter 8: appendix focus 3d x 130 mount dimensions figure 8-4 focus 3d x 130 mount drawings.

  • Page 125: Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 117 chapter 8: appendix focus 3d x 130 dimensions figure 8-5 focus 3d x 130 dimensions.

  • Page 126: Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 118 chapter 8: appendix focus 3d x 130 power socket not connected gnd gnd +19v +19v figure 8-6 focus 3d x 130 power socket.

  • Page 127

    Faro ® laser scanner focus 3d x 130 manual january 2014 119 chapter 9: product environmental information chapter 9: product environmental information legislation is now in place within the european union (eu) that regulates waste from electrical and electronic equipment (weee). European directive 20...

  • Page 128

    Faro ® laser scanner focus 3d x 130 manual january 2014 120 chapter 9: product environmental information refer to www.Faro.Com for further environmental information concerning this product. Weee symbol.

  • Page 129: Technical Support

    Faro ® laser scanner focus 3d x 130 manual january 2014 121 technical support faro technologies, inc. Is committed to providing the best technical support to our customers. Our service policy is detailed in appendix c: industrial products service policy of this manual. If you have any problem using ...

  • Page 130: • Fax

    Faro ® laser scanner focus 3d x 130 manual january 2014 122 +81 561 63 1411 (worldwide) china: +400.677.6826 india: 1800.1028456 • fax north america: +1 407 333 8056 europe: +800 3276 1737, +49 7150 9797-9400 (worldwide) asia: +65 6543 0111 japan: +81 561 63 1412 china: +86 21 6494 8670 india: +91 1...

  • Page 131

    Faro ® laser scanner focus 3d x 130 manual january 2014 123 serial number. Do not forget to include your name, fax number, telephone number and extension so we can reach you promptly..

  • Page 132

    Faro ® laser scanner focus 3d x 130 manual january 2014 1 appendix a: software license agreement this software license agreement is part of the operating manual for the product and software system which you have purchased from faro technologies, inc. (collectively, the “licenser”). By your use of th...

  • Page 133

    Faro ® laser scanner focus 3d x 130 manual january 2014 2 vi. In the event of any breach by the licensee of this agreement, the license granted hereby shall immediately terminate and the licensee shall return the software media and all written materials, together with any copy of such media or mater...

  • Page 134

    Faro ® laser scanner focus 3d x 130 manual january 2014 3 appendix b: purchase conditions all purchase orders (hereafter, the “order”) for faro-provided products and services (hereafter, the “product”) are subject to the following terms and conditions, which are agreed to by the purchaser. All capit...

  • Page 135

    Faro ® laser scanner focus 3d x 130 manual january 2014 4 f) customer will be charged a 20% restocking fee for refusal to accept equipment as delivered. Equipment must be returned unopened within 10 business days of receipt at customer facility. 1.04if purchaser fails to make payment(s) in accordanc...

  • Page 136

    Faro ® laser scanner focus 3d x 130 manual january 2014 5 damage to the product was in fact caused in storage, transit or on installation, the opinion of faro’s technical advisors, acting reasonably, shall be conclusive. 3.00installation and operator training 3.01the purchaser shall be responsible f...

  • Page 137

    Faro ® laser scanner focus 3d x 130 manual january 2014 6 which shall be the amount that faro would otherwise charge for an evaluation under a non-warranty service evaluation. 4.06the warranties do not apply to: a) any defects in any component of a system where, if in the reasonable opinion of faro,...

  • Page 138

    Faro ® laser scanner focus 3d x 130 manual january 2014 7 all shipping charges. All charges shall be estimated and prepaid prior to commencement of repairs. 4.08nothing herein contained shall be construed as obligating faro to make service, parts, or repairs for any product available after the expir...

  • Page 139: 5.00Design Changes

    Faro ® laser scanner focus 3d x 130 manual january 2014 8 the products. No agent or employee of faro has any authority to make any representation or promise on behalf of faro, except as expressly set forth herein, or to modify the terms or limitations of the warranties. Verbal statements are not bin...

  • Page 140: 6.00Non-Disclosure

    Faro ® laser scanner focus 3d x 130 manual january 2014 9 implement such changes without the purchaser’s consent, however, nothing contained herein shall be construed as obligating faro to include such changes in the focus 3d x 130, software or system provided to the purchaser. 6.00non-disclosure 6....

  • Page 141: 8.00Definitions

    Faro ® laser scanner focus 3d x 130 manual january 2014 10 7.05these conditions shall not be construed more strictly against one party than another as a result of one party having drafted said instrument. 8.00definitions 8.01“faro” means faro technologies, inc. 8.02“purchaser” means the party buying...

  • Page 142

    Faro ® laser scanner focus 3d x 130 manual january 2014 11.

  • Page 143: Warranty

    Faro ® laser scanner focus 3d x 130 manual january 2014 13 appendix c: industrial products service policy a one-year maintenance/warranty comes with the purchase of new faro manufactured hardware products. Supplemental service plans are also available at additional cost. See appendix d: industrial s...

  • Page 144: Warranty

    Faro ® laser scanner focus 3d x 130 manual january 2014 14 faro hardware not under maintenance/ warranty factory assessments and repairs on faro-manufactured products will follow the following procedure: 1 the customer obtains a service number from faro’s customer service department. 2 the customer ...

  • Page 145: Focus

    Faro ® laser scanner focus 3d x 130 manual january 2014 15 focus 3d x 130 repair fee schedule (out of maintenance/warranty owners only!) system testing and evaluation fee - contact your local faro service center for pricing. A fee is charged for any system testing and evaluation. This includes syste...

  • Page 146: Plan Agreement

    Faro ® laser scanner focus 3d x 130 manual january 2014 16 transfer of original warranty or service plan agreement _________________________________________________________ (seller’s corporate or individual name as applicable), hereby waives all rights under the warranty service policy for focus 3d ...

  • Page 147

    Agreed ________________________________ (print seller’s corporate or individual name as applicable) by x___________________________ __ (print name of signatory) ________________________________ (print seller’s corporate or individual name as applicable) by x___________________________ __ (print name...

  • Page 148

    Faro ® laser scanner focus 3d x 130 manual january 2014 19 appendix d: industrial service policy this service plan (hereafter, the “plan”) is part of the operating manual for the faro manufactured product purchased from faro technologies inc. (hereafter, “faro”). The plan and all of the optional add...

  • Page 149: 2.00 Definitions

    Faro ® laser scanner focus 3d x 130 manual january 2014 20 1.07in the event that faro replaces any product or replacement product, faro retains all right, title, and interest in and to all products or portions of products that were replaced by faro. 2.00 definitions 2.01“faro” means faro technologie...

  • Page 150: Hardware Coverage

    Faro ® laser scanner focus 3d x 130 manual january 2014 21 • shipping costs, including insurance from the purchaser to faro are the responsibility of the purchaser. Faro will be responsible for all return shipping costs including insurance. • all reasonable efforts will be made to keep the service r...

  • Page 151: Software Coverage

    Faro ® laser scanner focus 3d x 130 manual january 2014 22 • software operating system installation. • user intentional or unintentional removal of key software property or files. Software coverage covered • periodically, faro technologies may release maintenance updates of its proprietary software....

  • Page 152

    Faro ® laser scanner focus 3d x 130 manual january 2014 23 appendix e: expert opinion - classification of the focus 3d x 130 according to iec 60825-1 ed. 2.0

  • Page 153

    Faro ® laser scanner focus 3d x 130 manual january 2014 24.

  • Page 155

    Faro ® laser scanner focus 3d x 130 manual january 2014 26.

  • Page 156: Google-Breakpad

    Faro ® laser scanner focus 3d x 130 manual january 2014 27 appendix f: implementation notes the scanner's firmware includes several standard applications and libraries which are released under different licenses. Google-breakpad copyright (c) 2006, google inc. All rights reserved. Redistribution and...

  • Page 157: Paintlib

    Faro ® laser scanner focus 3d x 130 manual january 2014 28 paintlib the scanner's firmware contains paintlib code. Paintlib is copyright (c) 1996- 2000 ulrich von zadow. Libtiff copyright (c) 1988-1997 sam leffler copyright (c) 1991-1997 silicon graphics, inc. Jpeg the scanner's firmware is based in...

  • Page 158: Apache

    Faro ® laser scanner focus 3d x 130 manual january 2014 29 procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising i...

  • Page 159

    Faro ® laser scanner focus 3d x 130 manual january 2014 30 version 2.0, january 2004 http://www.Apache.Org/licenses/ terms and conditions for use, reproduction, and distribution 1. Definitions. "license" shall mean the terms and conditions for use, reproduction, and distribution as defined by sectio...

  • Page 160

    Faro ® laser scanner focus 3d x 130 manual january 2014 31 "derivative works" shall mean any work, whether in source or object form, that is based on (or derived from) the work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original...

  • Page 161

    Faro ® laser scanner focus 3d x 130 manual january 2014 32 contribution(s) was submitted. If you institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the work or a contribution incorporated within the work constitutes direct or contribut...

  • Page 162

    Faro ® laser scanner focus 3d x 130 manual january 2014 33 whole, provided your use, reproduction, and distribution of the work otherwise complies with the conditions stated in this license. 5. Submission of contributions. Unless you explicitly state otherwise, any contribution intentionally submitt...

  • Page 163: Gpl

    Faro ® laser scanner focus 3d x 130 manual january 2014 34 rights consistent with this license. However, in accepting such obligations, you may act only on your own behalf and on your sole responsibility, not on behalf of any other contributor, and only if you agree to indemnify, defend, and hold ea...

  • Page 164

    Faro ® laser scanner focus 3d x 130 manual january 2014 35 if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the sa...

  • Page 165

    Faro ® laser scanner focus 3d x 130 manual january 2014 36 "copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "the program" refers to any copyrightable work licensed under this license. Each licensee is addressed as "you". "licensees" and "rec...

  • Page 166

    Faro ® laser scanner focus 3d x 130 manual january 2014 37 the "system libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a major component, but which is not part of that major component, and (b) serves only to enab...

  • Page 167

    Faro ® laser scanner focus 3d x 130 manual january 2014 38 behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions s...

  • Page 168

    Faro ® laser scanner focus 3d x 130 manual january 2014 39 b) the work must carry prominent notices stating that it is released under this license and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". C) you must license the en...

  • Page 169

    Faro ® laser scanner focus 3d x 130 manual january 2014 40 c) convey individual copies of the object code with a copy of the written offer to provide the corresponding source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an off...

  • Page 170

    Faro ® laser scanner focus 3d x 130 manual january 2014 41 which the right of possession and use of the user product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the corresponding source conveyed under this section must be ac...

  • Page 171

    Faro ® laser scanner focus 3d x 130 manual january 2014 42 b) requiring preservation of specified reasonable legal notices or author attributions in that material or in the appropriate legal notices displayed by works containing it; or c) prohibiting misrepresentation of the origin of that material,...

  • Page 172

    Faro ® laser scanner focus 3d x 130 manual january 2014 43 permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright hol...

  • Page 173

    Faro ® laser scanner focus 3d x 130 manual january 2014 44 may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the program or any portion of it. 11. Patents. A "contr...

  • Page 174

    Faro ® laser scanner focus 3d x 130 manual january 2014 45 to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is "discriminatory" if it does...

  • Page 175

    Faro ® laser scanner focus 3d x 130 manual january 2014 46 14. Revised versions of this license. The free software foundation may publish revised and/or new versions of the gnu general public license from time to time. Such new versions will be similar in spirit to the present version, but may diffe...

  • Page 176: Lgpl

    Faro ® laser scanner focus 3d x 130 manual january 2014 47 permitted above, be liable to you for damages, including any general, special, incidental or consequential damages arising out of the use or inability to use the program (including but not limited to loss of data or data being rendered inacc...

  • Page 177

    Faro ® laser scanner focus 3d x 130 manual january 2014 48 copyright (c) 2007 free software foundation, inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. This version of the gnu lesser general public license incorporates the t...

  • Page 178

    Faro ® laser scanner focus 3d x 130 manual january 2014 49 if you modify a copy of the library, and, in your modifications, a facility refers to a function or data to be supplied by an application that uses the facility (other than as an argument passed when the facility is invoked), then you may co...

  • Page 179

    Faro ® laser scanner focus 3d x 130 manual january 2014 50 0) convey the minimal corresponding source under the terms of this license, and the corresponding application code in a form suitable for, and under terms that permit, the user to recombine or relink the application with a modified version o...

  • Page 180

    Faro ® laser scanner focus 3d x 130 manual january 2014 51 be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the library as you received it specifies that a certain numbered version of ...

  • Page 181

    Faro ® laser scanner focus 3d x 130 manual january 2014 52.

  • Page 182

    Faro ® laser scanner focus 3d x 130 manual january 2014 53 appendix g: trademarks faro and faro laser scanner focus 3d x 130 are registered trademarks or trademarks of faro technologies inc. All other brand and product names are trademarks or registered trademarks of their respective companies. Micr...

  • Page 183

    Faro ® laser scanner focus 3d x 130 manual january 2014 54.

  • Page 184: Fcc Warning

    Faro ® laser scanner focus 3d x 130 manual january 2014 55 appendix h: fcc compliance statement (applicable in the u.S.) this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1 this device may not cause harmful interference, and 2 this device must ...

  • Page 185: Canadian Doc Notice

    Faro ® laser scanner focus 3d x 130 manual january 2014 56 this is a class b product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Canadian doc notice for class b computing devices this digital apparatus does n...

  • Page 186

    Faro ® laser scanner focus 3d x 130 manual january 2014 57 declaration of conformity 7udgh1dph )$52 3urgxfw1dph )rfxv ' ;; this device complies with part 15 of the fcc rules 2shudwlrqlvvxemhfwwrwkhiroorzlqjfrqglwlrqv 7khghylfhvpd\qrwfdxvhkdupixolqwhuihuhqfhdqg 2. 7khghylfhvpxvwdffhswdq\lqwhuihuhqfhu...

  • Page 187

    Faro ® laser scanner focus 3d x 130 manual january 2014 58.

  • Page 188: Ec Declaration of Conformity

    Faro ® laser scanner focus 3d x 130 manual january 2014 59 appendix i: ce conformity ec declaration of conformity according to the council directive 93/68/eec faro scanner production gmbh lingwiesenstraße 11/2 d-70825 korntal-münchingen germany herewith we declare that the 3d-laser scanner product f...

  • Page 189

    Faro ® laser scanner focus 3d x 130 manual january 2014 60

  • Page 190

    Faro and faro laser scanner focus 3d are registered trademarks and trademarks of faro technologies, inc. Faro technologies, inc. 250 technology park lake mary, fl 32746 800-736-2771 u.S. / +1 407-333-3182 worldwide e-mail: support@faro.Com faro europe gmbh & co. Kg lingwiesenstrasse 11/2 d-70825 kor...