Fast Forward Video Mini dvr Pro User Manual

Other manuals for Mini dvr Pro: User Manual
Manual is about: Compact Flash Model

Summary of Mini dvr Pro

  • Page 1

    Compact flash model digital video recorder user’s manual revision 1.9 october 2008 1151 duryea avenue, irvine, ca 92614, usa phone: (949)852-8404 fax: (949)852-1226 http://www.Ffv.Com the design of the mini dvr pro is proprietary. No part of the mini dvr pro manual may be copied or modified without ...

  • Page 2

    Mini dvr pro ™ manual, fast forward video, inc. 2.

  • Page 3

    Mini dvr pro ™ manual, fast forward video, inc. 3 table of contents overview.................................................................................................................................................................................. 5 s tandard f eatures ..........................

  • Page 4

    Mini dvr pro ™ manual, fast forward video, inc. 4 (this page intentionally blank).

  • Page 5

    Mini dvr pro ™ manual, fast forward video, inc. 5 overview the mini dvr pro is a standalone, handheld, pocket-sized digital video recorder with exceptional image quality, featuring scalable motion-jpeg compression and an outstanding 720 x 486 pixel image resolution. The dvr records up to 2 hours at ...

  • Page 6

    Mini dvr pro ™ manual, fast forward video, inc. 6 front bezel buttons and functions pass-thru: the red led to the left of the record button will flash once per second indicating that it is in digital pass-thru mode, which indicates it is record ready. Pushbutton operation function req. State keys no...

  • Page 7

    Mini dvr pro ™ manual, fast forward video, inc. 7 rear panel illustration 1. Usb port 2. Audio jack - stereo line out 3. I/o connector: - composite video – in / out - y/c video – in / out - external triggers - 1 & 2 in - reference video – in - 2 lines audio – in - 1 line mic – in - rs232 in / out 4....

  • Page 8

    Mini dvr pro ™ manual, fast forward video, inc. 8 connector pin-outs: video, rs-232 i/o; trigger, audio in headphone / line audio output mini-jack… the mating connector: hr25-9p-20pc. Standard 2.5mm stereo connections 1 cv or y in tip left hp output 2 trig 1 ring right hp output 3 gnd shank ground 4...

  • Page 9

    Mini dvr pro ™ manual, fast forward video, inc. 9 led operation the action described below occurs immediately when the button is pressed. Led operation mode action led display pass-thru pause 1 high - 0.1 sec. Per sec. - single short blink per second. Pass-thru record 1 high output - led on. Playbac...

  • Page 10

    Mini dvr pro ™ manual, fast forward video, inc. 10 native mode vs bvw-75 mode native mode native mode is the most natural state for the dvr to operate in as it utilizes the random access capabilities of the hardware most effectively. As you record material to the dvr, it stores the material in avail...

  • Page 11

    Mini dvr pro ™ manual, fast forward video, inc. 11 firmware updating procedure new features for the mini dvr pro are posted to our website as they become available. Our customers have access to these features via firmware updates for the lifetime of the product. Please check this site regularly to i...

  • Page 12

    Mini dvr pro ™ manual, fast forward video, inc. 12 specifications - specifications subject to change without notice video input atapi / ide controller analog input: composite and s-video (y/c). Protocol: atapi dma mode 3 levels: 1.0vp-p, 75 ohms maximum data rate: 16.6 mb/sec standards: 525/60 (ntsc...

  • Page 13

    Mini dvr pro ™ manual, fast forward video, inc. 13 maintenance cleaning the housing should only require dusting with a soft cloth. Operation and storage environment precautions the mini dvr pro has been built to meet the demands of a professional environment, however, the hardware is subject to the ...

  • Page 14

    Mini dvr pro ™ manual, fast forward video, inc. 14 limited warranty 12 – month limited warranty fast forward video, inc. Warrants to the original purchaser that the product (hardware and components) shall be free from defects in material and workmanship for a period of 1 year from the date of purcha...