1. DL manuals
  2. Fast Forward Video
  3. DVR
  4. NDT 200
  5. User Manual

Fast Forward Video NDT 200 User Manual

Summary of NDT 200

  • Page 1

    Ndt 200 ™ digital video recorder user’s manual revision 1.4 october 2006 fast forward video 18200 west mcdurmott, suite b, irvine, ca 92614, usa phone: (949)852-8404 fax: (949)852-1226.

  • Page 2

    Ndt 200 ™ manual, fast forward video, inc. 2 http://www.Ffv.Com the design of the ndt 200™ is proprietary. No part of the ndt 200™ manual may be copied or modified without the written consent of fast forward video, inc. Printed in the u.S.A..

  • Page 3

    Ndt 200 ™ manual, fast forward video, inc. 3 table of contents overview.................................................................................................................................................................................. 5 s tandard f eatures ...............................

  • Page 4

    Ndt 200 ™ manual, fast forward video, inc. 4 (this page intentionally blank).

  • Page 5

    Ndt 200 ™ manual, fast forward video, inc. 5 overview the ndt 200™ is a standalone, handheld, digital video recorder with exceptional image quality, featuring scalable motion jpeg compression at an outstanding 720 x 480 pixel image resolution. The dvr records up to 26 hours at a 20:1 compression wit...

  • Page 6

    Ndt 200 ™ manual, fast forward video, inc. 6 speedy get-started manual the ndt 200™ startup is very straightforward. Install drive - open the drive door, slide the sata drive into the unit and close the door. Apply power - plug the power adapter into a wall socket and connect it to the power input o...

  • Page 7

    Ndt 200 ™ manual, fast forward video, inc. 7 front bezel buttons and functions power switch: the green pushbutton is the power button, press and release to start the ndt 200™. When the unit is “on”, pressing the power button for 5 seconds will turn the unit “off”. Pass-thru: the led below the power ...

  • Page 8

    Ndt 200 ™ manual, fast forward video, inc. 8 lcd / touch panel operation the ndt 200™ lcd and touch panel provide user interface to enable feedback from the unit during operation, unit configuration, and clip management. System status screen – this screen comes up at power-up. It shows folder and cl...

  • Page 9

    Ndt 200 ™ manual, fast forward video, inc. 9 set pre-event recording – option – setting is 00 (off) to 15 minutes. Incr, decr, set, exit incr – press to increase the duration by 1 minute. Decr – press to reduce the duration by 1 minute. Set – press to set selected time and exit the screen. Exit – ex...

  • Page 10

    Ndt 200 ™ manual, fast forward video, inc. 10 set video format – ntsc/pal, exit. Ntsc or pal indicates what the setting will change to when button is pressed. Firmware version and update – select, exit select enters screen to display firmware versions and unit serial number. Soft keys in screen are:...

  • Page 11

    Ndt 200 ™ manual, fast forward video, inc. 11 optional feature description time lapse recording – skips a user-defined number of frames (set as time code format) between the captured frames. This is useful to extend record time when every frame is not absolutely critical or to capture a long-term ev...

  • Page 12

    Ndt 200 ™ manual, fast forward video, inc. 12 variable speed playback (selected speeds) – selectable fixed speeds settings are 6,12, 24, 25, 30, 33, 60, 90, 120, 150, 180, 240 frames per second. Video played recorded at 30fps and played at 6fps will play 5 times faster than normal. The same video pl...

  • Page 13

    Ndt 200 ™ manual, fast forward video, inc. 13 led operation the action described below occurs immediately when the button is pressed. Led operation mode action led display pass-thru pause red high - 0.1 sec. Per sec. - single short blink per second. Pass-thru record red high output - led on. Playbac...

  • Page 14

    Ndt 200 ™ manual, fast forward video, inc. 14 firmware update procedure new firmware for the ndt 200™ is posted to our website as it becomes available. Our customers have access to this firmware for the lifetime of the product. Please check this site regularly to implement the newest changes. Firmwa...

  • Page 15

    Ndt 200 ™ manual, fast forward video, inc. 15 specifications video input analog input: composite and s-video(y/c). Levels: 1.0vp-p, 75 ohms standards: 525/60 (ntsc) or 625/50 (pal) video output analog output: composite and s-video (y/c). Horizontal resolution: 550 tv lines (at 5:1 compression) level...

  • Page 16

    Ndt 200 ™ manual, fast forward video, inc. 16 maintenance cleaning the housing should only require dusting with a soft cloth. Operation and storage environment precautions the ndt 200™ dvr has been built to meet the demands of a professional environment, however, the hardware is subject to the same ...

  • Page 17

    Ndt 200 ™ manual, fast forward video, inc. 17 limited warranty 12 – month limited warranty fast forward video, inc. Warrants to the original purchaser that the product (hardware and components) shall be free from defects in material and workmanship for a period of 1 year from the date of purchase, i...