Fast Weigh Scales ZX-650 User Manual - page 6
of
7
ZX-650
IX. Troubleshooting
•
Problem: Scale will not turn on
•
Solution: Check the batteries
•
Problem: Displayedweightfluctuatesrandomly
•
Solution: Make sure your workspace is stable and
free of any air currents or vibration
•
Problem: Displayed weight is inaccurate
•
Solution: Perform a calibration adjustment
X. Error Codes
1. OUTZ - Zero range has shifted. Perform calibration
adjustment. If the problem persists, the load cell may
be permanently damaged due to overloading.
2. H - Maximum capacity exceeded. Remove the extra
weight to avoid damaging the load cell.
3. E - Batteries are low. Replace the batteries.