Fastec Imaging TS3 Quick Start Manual - page 3
Saving Video from Image Memory
1. Select the Save Icon from the playback controls. This will bring up a dialog that allows selection of the following:
• Start and Stop points of the clip (these points can also be changed using Cut In/Out buttons on the playback controls).
• Destination—where the movie clip is to be saved. Choices include the built-in SSD, (an option), an SD card or a USB drive.
• The file Format desired—CAP (proprietary raw format), AVI video, or DNG, BMP, JPEG, or TIFF stack.
• File name prefix, which may optionally include the camera name or user-defined tag..
2. When the movie clip is set up as desired, press the Save icon on the Save dialog. A new dialog will open with the heading Copy in
Progress. This dialog indicates the status of the file save operation.
3. When the file save is complete, the dialog will display a message indicating Copy completed successfully. Press the OK icon to set
the camera back into Review Mode. Click on the Live button to put the camera back into Live Mode.
There a several methods available to permanently save images:
• Load FasMotion software on a computer (PC or MAC). FasMotion has utilities for saving images from camera memory to any
camera media or to any media connected to the PC. This is the fastest method of operation. Please refer to the TS3 User Manual
for details.
• Download images from the image memory to an SD card installed in the SD port in the camera. View or transfer the images using
an SD card reader or by inserting the SD card into a built-in SD port in the desired PC.
Save Images to a Host PC
Fastec Imaging Corporation
17150 Via Del Campo, Ste.301, San Diego, CA 92127
+1-858-592-2342
support@fastecimaging.com
Contact Information
3
Review a Video on the Camera Display
Use the playback icons to play forward, backward, or jump to points of interest in the movie. Use the Cut In and Cut Out icons to
select a portion of the movie to review or save.
Skip Back
Pause
Skip Fwd
Cut In
Cut Out
Save
Beginning
Play Bkwd
Play
End
Trigger
Live
The TS4 may be used in its “basic” mode, in which it is recording
relatively short clips into its internal high-speed memory, or in
“Long Recording Mode,” in which it is recording potentially much
longer clips directly into its built-in SSD.
To Select Long Recording Mode:
1. Open “User Preferences” in the “Configuration” menu
under “System.”
2. Click on the check box to select Long Recording Mode.
3. Click OK.
The camera will now restart in Long Recording Mode.
To Exit Long Recording Mode:
1. Return to “User Preferences.”
2. De-select Long Recording Mode. Note: in order to have access to the SSD after returning from Long Recording mode, the drive
must be formatted.
Long Record Selection for TS4