Fastora Fastora NAS T8 Specifications - page 2
Product Highlights and
Benefits
Form Factor
Capacity
Power Supply
Hard Drive
Rear Panel Connector
Front Panel Display
Front Panel LED
Processor
Main Memory
IDE Interface
Serial Port
Ethernet
Compact-Flash
Hardware Monitoring
Dimensions
Weight
Operation environment
Storage environment
Tower Design
From 0 to 2.0 TB and beyond, depending on hard disk drive capacity
Redundant 300W ATX power supplies
8 x Hot-Swap Enhance IDE HDD driver bays
2 x 10/100 Base-T Ethernet LAN port
1 x Gigabit Ethernet LAN port
1 x RS232 COM port
2 x 16 characters LCM support message display
8 x LEDs for HDDs
3 x LEDs for LANs
1 x LED for System
1x LED for Power status
1 x push-button for system reset
1 x push-button for power on/off
Intel® Pentium III CPU Architecture ( support up to 1.26GHz )
One PC100/133 SDRAM DIMM ( up to 512MB )
Eight bus mastering ATA 66/100/133 Enhance IDE channels
One UART Serial Port
Two 10/100 Base-T Ethernet and One Gigabit Ethernet Supporting Fail-over
and Trunking
One IDE interface CompactFlash
TM
socket for embedded use
Detection for four Fans, and for the CPU thermal temperature monitoring
177.4mm (7")(W) x 448mm (17.6")(H) x307.5mm (12.1")(D)
Approx.13.5 kg without hard drive
Air temperature: 10ºC –35ºC
Humidity: 10% – 95%
Air temperature: -20ºC – 65ºC
Humidity: 10% – 95%
Hardware Specifications
Ordering Information
NAS-T8
Redundant 300W ATX power supply / PIII 1.13GHz or above / 256MB DIMM / Gigabit
NAS – T8
Reseller Information
PIII 1.13G/133/256K
Celeron 1.2G/100/256K
Celeron 1.3G/100/256K
PIII 1.26G/133/512K