1. DL manuals
  2. Fatar
  3. Power Supply
  4. ST-90 Plus
  5. User Manual

Fatar ST-90 Plus User Manual

Manual is about: Studiologic ST-90 Plus Music Keyboard-Accessories: User Manual

Summary of ST-90 Plus

  • Page 1

    Thank you for purchasing the fatar studio-90 plus, the finest feeling master controller on the market today. The action is a result of many years of engineering that went into the keyboard mechanism. There are actually hammers that strike a surface that simulates a piano string. The fatar studio-90 ...

  • Page 2: Connections:

    Connections: the studio-90 plus can be supplied with a road case or with a beautiful designed cabinet. All the functions are the same, but cosmetically they are quite different. The following will explain the difference between the two regarding the back panel. Look at figure #1. It shows the back p...

  • Page 3: Fig. #2

    Look at figure #2 and #3. The functions are the same, but the location of the midi outs and foot switch controls are separated from the power section. You will find this configuration on the st-90 plus in the cabinet. Fig. #2 fig. #3 note: if you want merging capabilities with the studio-90 plus, yo...

  • Page 4: Let'S Get Started

    Section i: getting started in this section we will explore the possibilities of the studio-90 plus in its entirety. Do not skip any pages. Since each function depends on a previous parameter, it is probably best to read carefully from here on out. Let's get started in this section you should get rea...

  • Page 5: Parameters:

    Can get the feel of moving through programs. (you will find that the enter button must be pressed every' time you want a function to work properly regardless what you are attempting to do.) another way to advance programs, is to use a foot switch plugged into the program change jack, located on the ...

  • Page 6

    At this time the keyboard is asking you at what key location on the keyboard would you like your first split. You will see a number in the screen. No matter what that number is now, please press 27 on the numeric key pad. This number will flash. Now press the enter key to lock this position into the...

  • Page 7: Transposer:

    Transposer: locate parameter 02 through 04 on the parameter chart at top of the keyboard that are clearly marked as transposer 1, 2, and 3. Use these functions for transposition. Why are there three transposer functions? The answer is, there are three zones, so there must be a control for transposit...

  • Page 8: Channel Midi:

    Channel midi: parameters 08, 09, and 10 are midi channel functions. You will locate them on the parameter chart as channel midi 1, 2 and 3. Again, 1, 2, and 3, refers for zones one, two, and three. The values of these parameters are midi channels 1 through 16, represented by 01, 02, 03, 04, 05, 06, ...

  • Page 10

    Channel mode default messages note number velo. Note on note off after key,s touch ch's pitch bender control 1 change: 2 4 5 6 7 64 65 velocity dyn. Velocity rel. Program chg. Sys. Ex. Song position song select tune clock commands local on/off all notes off active sense reset 10 3 x 0 - 0 0 x x 0 0 ...

  • Page 11

    00= 01= 0 2 = 03= 04= 05= 06= 07= 08= 09= 10= 12= 13= 14= 15= 16= 17= 18=.