FATMAN Mi-Tube User Manual - page 4
Mi-Tube
User Manual
Mi-Tube Hybrid Valve 28 watt Amplifier with Bluetooth
Amplifier Connections
Before connecting anything to or from your Mi-Tube, switch OFF the power to the Mi-Tube and to the components you want to connect.
Make sure that all connections between the Mi-Tube and other components are made correctly, L (left) goes to L & R (right) goes to R.
Don’t forget to refer to the owners manual of each component that you want to connect.
Speaker Connections
Connect to your speakers using quality speaker wire.If your speaker wires are not connected properly you may hear no sound at all, or if
the wires are mixed up it will sound weird with a disturbing loss of bass.
When using bare speaker wires, fit at least 1.6mm of insulation inside the speaker terminals so there’s no bare wire showing.
Any speakers you connect should have an impedance of 4-8 ohms - if it’s not written on the back of the speaker contact the manufacturer.
Make sure the wire holders are firmly screwed in, to stop the wires from becoming loose. If wires touch the speakers or the unit could be
damaged.
Always turn OFF the power switches when you’re connecting or disconnecting from the mains.
Disconnect from the mains if you’re not planning to use your Mi-Tube for a while eg. Holidays
Page 4