FAURE FDF516 User Manual - page 11
When the washing programme operates, you
cannot change the programme. Cancel the wash-
ing programme.
Warning! Only interrupt or cancel a washing
programme if necessary.
Caution! Open the door carefully. Hot steam can
come free.
Cancelling a washing programme
1. Press and hold function buttons B and C until:
– All the programme lights come on,
– The programme-in-progress indicator light goes
off.
2. Release function buttons B and C to cancel the
washing programme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you
set a new washing programme.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of inter-
ruption.
Setting and starting a washing programme
with delay start
1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the display shows
on flashing the necessary delay start of the wash-
ing programme.
4. Close the door.
– The number on the display comes on with fixed
light.
– The programme-in-progress indicator light goes
off.
– The countdown of the delay start starts.
– The countdown of the delay start decreases with
steps of 1 hour.
– When the countdown is completed, the washing
programme starts automatically.
– The programme-in-progress indicator light
comes on.
Do not open the door during the countdown to
prevent interruption of the countdown. When you
close the door again, the countdown continues from the
point of interruption.
Cancelling a delay start:
1. Press and hold function buttons B and C until:
– All the programme lights come on
– The programme-in-progress indicator light goes
off.
When you cancel a delay start, you also cancel the
washing programme.
2. Set a new washing programme.
You can select the washing programme and de-
lay start also with the door closed. When you
press a programme button you have only 3 seconds to
select a different washing programme or a delay start.
After these 3 seconds, the selected programme starts
automatically.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The display shows 0.
• The programme in progress indicator light remains
on.
1. Press the on/off button.
2. Open the door.
3. For better drying results, keep the door ajar for
some minutes before you remove the dishes.
Let the dishes cool down before you remove them from
the appliance. Hot dishes are easily damaged.
Standby mode
If you do not switch off the appliance at the end of the
washing programme, the appliance automatically goes
into standby mode. The standby mode decreases en-
ergy consumption.
Three minutes after the end of the programme, all in-
dicator lights go off and the digital display shows one
horizontal bar.
Press one of the buttons (not the on/off button), to go
back to end-of-programme mode.
11