- DL manuals
- FaVal
- Receiver
- MERCURY S75
- Operating Instructions Manual
FaVal MERCURY S75 Operating Instructions Manual
Summary of MERCURY S75
Page 1
Digital satellite receiver mercury s75 operating instructions _______________________________________________________________ version 1.0 18.08.08.
Page 2
Table of contents _______________________________________________________________ 2 table of contents table of contents................................................................................................ 2 preface .............................................................................
Page 3
Preface _______________________________________________________________ 3 preface dear customer, thank you very much for choosing our satellite receiver. You have selected a receiver of our new generation – the experience of 10 years of digital transfer technology go into our faval receivers. Please...
Page 4
Safety information _______________________________________________________________ 4 safety information read the operating instructions thoroughly before connecting the device. • operate the device only on mains with a corresponding power connect ion. • operate the device near an outlet and configur...
Page 5
Safety information _______________________________________________________________ 5 • batteries can contain poisonous substances. Keep batteries out of reach of children, as the batteries could be swallowed. • leaking batteries can cause damage in the remote control. Batteries can contain poisonous...
Page 6
Receiver front view _______________________________________________________________ 6 receiver front view receiver back 1. Digital audio: digital coaxial audio connection 2. Audio-l: left analog audio connection 3. Audio-r: right analog audio connection 4. Lnb out: loop-through connection of the rec...
Page 7
Remote control _______________________________________________________________ 7 remote control.
Page 8
Remote control buttons _______________________________________________________________ 8 remote control buttons no. Symbol explanation 1 turn on and standby 2 0- 9 enter program directly, digit input 3 subtl check if subtitles are available for the broadcast 4 16:9 switch from 4:3 to 16:9 full-scree...
Page 9
Connect receiver _______________________________________________________________ 9 connect receiver (fig. Similar).
Page 10
1. Installation _______________________________________________________________ 10 1. Installation connect the receiver with the antenna cable and plug the receiver into your tv set. Plug the power plugs of the connected devices in the power socket and switch on the receiver with the standby button....
Page 11
1. Installation _______________________________________________________________ 11 scan mode select “search” to search for channels on the selected satellite. In the next submenu first select the type of search function for the selected satellite: fta, all, fta+nit, all+nit fta (free-to-air): search...
Page 12
1. Installation _______________________________________________________________ 12 1.3 transponder list by pressing the green button in the installation menu of the antenna settings the list of previously selected satellites is opened in the transponder list. In this menu item you can search, edit, ...
Page 13
2. Edit program _______________________________________________________________ 13 2. Edit program open the “edit program” menu at main menu / program. In this menu you can change, block, remove from program list, delete, move and re-sort programs. Navigate the program list with the “ch ▲” and “ch ▼...
Page 14
3. Edit favorites _______________________________________________________________ 14 block channel select the channel you would like to block. First press the red button to open the expanded channel options and then press the blue button . The selected channel is now shown on the list with a lock sy...
Page 15
4. System settings _______________________________________________________________ 15 4.2 set a/v output in this menu item you can tune the picture on your tv set. Tv norm select the output format here which your color television set supports. You can select among pal, ntsc, secam or automatic. Vide...
Page 16
4. System settings _______________________________________________________________ 16 4.4 parental lock in this menu you can select which menu options should be password-protected and can be accessed only after entering the pin number. (the pin number in the factory setting is “0000”.) to block one ...
Page 17
5. Games _______________________________________________________________ 17 5. Games on your receiver there are – according to model – games installed. You can call up the game settings with the color buttons. While you play, the program most recently seen is shown in a small tv window . 6. Timer yo...
Page 18
7. Basic operating steps _______________________________________________________________ 18 program define the channel the receiver should switch on here. 7. Basic operating steps switch between radio mode and tv mode to switch between radio mode and tv mode, press the “tv/radio” button. Channel sel...
Page 19
Cleaning _______________________________________________________________ 19 cleaning danger of electric shock! Liquid must not enter the receiver. Never clean with a wet cloth. Unplug from the power socket before cleaning the power plug. Note! Do not use solvent-containing cleaning agents like benzi...
Page 20
Eliminating malfunctions _______________________________________________________________ 20 eliminating malfunctions symptom possible cause and remedy the display does not work. The power cable is not connected. Connect the power cable to the power socket. No tone, picture, led on the receiver. The ...
Page 21
Technical information _______________________________________________________________ 21 technical information receiver operating temperature 0 ºc bis +40 ºc storage temperature –40 ºc bis +65 ºc lnb/tuner input f-socket iec 169–24 input frequency range 950 mhz ~ 2150 mhz input level range –65 dbm b...
Page 22
Technical information _______________________________________________________________ 22 notes:.
Page 23
Technical information _______________________________________________________________ 23 service please contact your specialized dealer. Declaration of conformity compliance with the following guidelines and norms for this product is hereby declared: low voltage guidelines 73/23/ewg en 60 335-1 en 6...
Page 24
Thank you very much for choosing our product. Our product is in compliance with legal requirements and was made under constant quality control. The technical data complies with the present state at the time of printing. Subject to change..