FAVI Entertainment RioHD-LED-3 User Manual - page 4
Menu Settings
11
Picture Menu
Sound Menu
Time Menu
Safety Precautions
WARNING:
Before use, please read this manual carefully. If not operated correctly it can cause
electrical shock or fire. When using or repairing this projector, please comply with
the following suggestions.
2
1. Cleaning: When cleaning this projector,
make sure the power is unplugged. Use a
soft cloth to clean. Do not use harsh
cleansers.
2. Accessories: To avoid any damages to
the projector, use accessories enclosed in
the package.
3. Environmental Conditions: Do not
place the projector in wet or moist
conditions.
4. Installation: Please only place the
projector on stable and leveled areas.
5. Ventilation: Do not block ventilation
when in use. Keep filter cleaned or it will
cause the projector to overheat. Rinse
the filter monthly.
6. Power: Match power source (220V or
110V)
7. Ground Cable: 3-pin plug
8. Power Cable: Inspect power cable
before plugging into the power source.
9. Lightning: When not in use for long
period of time or during storms, please
unplug the power cable.
10. Repair: Due to high voltage, do not
attempt to repair the projector yourself.
Please contact:
techsupport@favientertainment.com
11. Heat Sensitive Device: Do not use near
other heating devices. This can damage
the performance of the projector.
Picture Menu
Sound Menu
Time Menu
Picture mode
Color Temperature
Aspect Ratio
Noise Reduction
Flip Horizon
Flip Vertical
Standard / Soft/ User / Dynamic
Standard / Warm / Cool
4:3 or 16:9 / Zoom 1 / Zoom 2
Off / Low / Middle / High
On / Off
On / Off
Sound Mode
Balance
Auto Volume
Surround Sound
EQ
Clock ----
Off time
On time
Sleep timer
Music / Movies / Sports / User / Standard
-50~50
On / Off
On / Off
(120 / 500 / 1.5K / 5K / 10K) Hz 50
Date / Month / year / Hour / Minutes
Off / One time / Everyday / Monday-Friday
Off / One time / Everyday / Monday-Friday
Off / 10 mins / 20 mins / 30 mins / 60 mins / 90 mins
User mode of picture
Contrast
Brightness
Color
Sharpness
0 - 100
0 - 100
0 - 100
0 - 100
Adjust the dark and brightness area difference.
Adjust the full picture brightness.
Adjust the picture color.
Adjust the picture sharpness.
NOTE