FAVI LED-2 User Manual - page 10
Image adjustment
Focus adjustment
Keystone correction
8
(1)
(2)
// /////////////////////// // ////// /////
////////// // // /////////////////////// /
Screen
High-feet
adjustment
High
9
Menu setting
Menu setting method
1.when projector are working,press“menu”key,the menu will show on the
screen(picture 1)
2.press“ < / > ”key,the menu change “picture” > “sound” > “TV” > “
function” > “OSD” interface;
3.After confirm the menu,press“∧/∨”key to choose sub-title(picture 2)
4.press“ < / > ”key to adjust the sub-title (picture 3) 。
5.after all action,press the “menu”key,exit the menu setting.
★ Note:if the function mark is grey ,it indicate that this function are not valid
CO N T R A ST
BRIGHT N E S S
HUE
C O LOR T EMP.
STAN D A R D
Pictu r e
S A T U R ATION
SHAR P N E SS
M OVE
SELECT
EX I T
MENU
PC
BR I G H TNESS
HUE
COLO R T E M P .
S T A N DARD
图 像
S ATURA T I O N
S H A RPNESS
MOV E
SE L E C T
E X IT
MENU
P C
C O NTRAST
(picture 1)
(picture 2)
(picture 3)
EXIT
MENU
C O N T RAS T
A D J USTM E N T
72
When using the projector first time,it will commonly appeared with image faintess and the image is trapeziod
Following suggestions below to adjust focus.
Turn the lens into the projector,then turn it out slowly,
at the same time,looking at the resolution point carefully,
when the image is very clearly (take the middle area
of the image),it is the best situation of the lens
If a projected picture has keystone distortion,
correct image with Keystone adjustment. The image
becomes trapezoid shape when the screen or project is
not level. Please reposition the projector to improve
its angle to the screen. However, the circumference of
the image may not be focussed.
Screen
High