FAVI RioHD-LED-4S User Manual - page 2
Environmental requirement
Accessories specification
Menu guide
Keybord/Remote
control
Safe mode
Overheat protection
Power adaptor
Input: AC100~240V 1.5A /50-60Hz; output: DC19V 4.74A
Maximum
output power: 90W; Length of the cable: 1.8 m
VGA cable
PVC black 50P, Length:
1.5 m
AC power cable
220V
/6A, Length of the cable: 1.3 m
Battery
Remote control: AAA
alkaline battery
Operating temperature
0°C~40°C (32°F~104°F)
Storage
temperature
-20°C~45°C (-4°F~113°F)
Operating humidity
10%RH~80%RH
Storage humidity
5%RH~95%RH
5
INTRODUCTIONS
5
.1Dimension ( L x W x H )
: 130 x 135 x 50 mm
5.1
5.3
1.9
2.1
Audio
Supports audio input
, 3.5mm audio output
Standard: NTSC/PAL/SECAM
Maximum resolution: 1920 x 1080, 60Hz
HDMI input
Best resolution: 800 x 600, 60Hz
VGA input
Maximum
resolution: 1280 x 720, 60Hz
AV input
Maximum resolution: 720p
Remote control
121 x 46 x 22 mm, Color: Silver grey
Po
w
er
Es
c
Flip
M
en
u
U
p
Le
ft
Rig
ht
D
ow
n
Bri
gh
tn
es
s
Vo
lu
m
e
M
ute
En
te
r
User
Guide
RioHD-LED-4S
4
SPECIFICATIONS
All specifications are subject to change without notice.
Weight
Approximately 1.4 lb
Display system
DLP projection technology
Model
RioHD-LED-4S
Basic specifications
Dimension ( L x W x H )
5.3 x 5.1 x 1.9 in
Screen size
Projection distance
0.5m-5m
15"-100"
Contrast ratio
2000:1
Focus
Manual
Aspect ratio
Brightness
150 ANSI lumens
858 × 600
Light source technology
RGB LED
Native resolution
16:9/4:3
3
PRODUCT
FEATURES
2
PACKAGE CONTENTS
VGA cable
AV cable
Power
adapter
Remote control
User
manual
Projector carrying bag
1 POWER INDICATIONS
ラエフャ
/ホハフ?
LEDヨクハセオニ
キ酲ネケハユマ
エサ?
オ釀エエ ェ
コ?ォ
クユイ衙マオ釀エ
オ釀エ
User Guide
RioHD-LED-4S
ホツカネケハユマ
ーエシ?
ホツカネアィセッ
キ酲ネアィセッ
コ?ォ
ツフ
ノォ
コ?ォノチヒク
コ?ォノチヒク
エ ェ
ケリアユ
エ ェ
ケリアユ
ケリアユ
ケリアユ
ケリアユ
ケリアユ
ケリアユ
エ ェ
ケリアユ
ケリアユ
ケリアユ
エ ェ
ケリアユ
The
LED-4S integrates high-performance, optical projection technoloy with
a user-friendly design. The LED-4S features include:
Three picture modes with various application options
Digital keystone correction with auto-adjust feature
16.77 million color display
Multi-language On-Screen Display (OSD) menu
Over 30,000 hours of lamp life
Brightness of 150 ANSI lumens
Power Indicator
USB flash disk / SD card
Audio: MP3, WMA
Video: MPEG2, MPEG4, RMVB, VOB, MP4
Picture: JPG, JPEG
Keystone
Manual/Auto
Ports
Input: DC/AV/VGA/HDMI/USB/SD; Output: Audio
Power consumption
MAX: 85W, Standard: 45W
LED life span
30
,000 hours
Status/symptoms
LED
Indicators
Power ON
Red
Green
On
Off
Fan Failure
Temperature Failure
Standby
Blinking
Blinking
Off
On
1
POWER
INDICATIONS
Off
Off
MEN
U
SO
URC
E
PO
WER
AV cable
3.5 mm, Length:
0.4 m, Composite: AC cable
Maximum resolution: 800 x 480
Unpack
the product and confirm that all of the items listed under contents
have been included.
Mute
Volume
Volume
Right
Menu
Esc
Down
Left
Up
Flip
Enter
4
Left
" "
Audio in cable
Audio out cable
External speaker system
Earphone cable Headphone output
TV
set-up box
DVD
Game
consoles
MP3/MP4
Digital
camcorder
Mobile phone
Digital camera
6
.4Inserting a SD card or USB memory
1. Inset a Micro-SD card into the Micro-SD slot on the projector.
2. Insert the USB flash drive into the USB port on the projector.
Mobile phone
6
.3Connectingtoan HDMIdevice
Connect the HDMI cable to the device and the HDMI input on the projector.
Connect to the HDMI
port on the device
HDMI port
blu-ray DVD
HD player
PC
Laptop
HDMI cable
Brightness
Brightness
Micro-SD slot
USB flash drive
USB port
M
OL
EX
Micro-SD card
Power
Projector
does not
turn on
Symptoms
No
picture
7
TROUBLE SHOOTING
Plug the power cord into the DC in jack on the
projector and plug the power cord into the
power outlet.
Cause
There is no power from the
power cable.
Wait until the cooling down process has
completed.
Attempting to turn the
projector onagain during the
cooling process.
Turn
the video source on and check that the
signal cable is connected correctly.
The video source is not turned
on or connected correctly.
The projector is not correctly
connected to the input signal
device.
Check the connection.
The input signal has not been
correctly selected.
Select the corrected input signal with the Source
key on the projector or Menu key on the remote
control.
Remedy
Remote
control
does not
work
Blurred image
The battery is out of power
Replace the battery with a new battery.
There is an obstacle between the
remote control and the projector.
Remove the obstacle.
The projector lens is not
correctly focused.
The projector and screen are
not aligned properly
Adjust the focus of the lens using the focus wheel.
You are too far away from the
projector.
Stand within 25ft of the projector.
Adjust the projector angle and the height.
6
.5Connectingtoanexternal speaker or earphone
Connect an audio cable from an external speaker system/earphone to the headphone
output on the projector.
6
.2Connecting to an AV device
Connect the AV cable to the device and the AV input on the projector.
VGA
port
VGA cable
PC
Laptops
Connect
to the VGA port
on the computer
DC in
6
CONNECTION SETUP
The LED-4S
works with a variety of digital devices, such as PCs, laptops, TV
set-up boxes, DVD, game consoles, digital cameras, digital camcorders, PMP,
smart phones that output video signals, and etc. Supports USB, SD card
and audio on the projector. Please follow the instructions for setup.
Connect
the VGA cable to the PC/laptop and the VGA input on the projector
.
6
.1 Connecting to a VGA device
When
connecting signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
NOTICE
5
.2Control buttons
Power
Source
Left
Down
Menu
Focus
Wheel
Up
Right
5
.3RemoteControl
8
SOURCE " "
SOURCE
2
When
in Menu, scroll the files up.
When playing videos, fast forward.
1
Adjust
the focus and projected image.
Item
Key
Functions
Focus
wheel
" "
Up
" "
2
Rotate the screen image.
1
Power
ON/OFF
Shift the projector between standby and operation mode.
Item
Key
Functions
Power " "
Flip
" "
3
Up
" "
7
8
Select
to decrease the brightness.
Exit and go back to upper menu.
6
Select to increase the brightness.
Brightness
" "
Brightness
" "
Esc
" "
9
Menu " "
10
Enter
" "
Decrease volume
11
12
Right
" "
Volume
" "
13
Volume
" "
Increase
volume
14
Mute
Mute
" "
5
Down " "
Mobile phones with USB port are supported (USB drive software installation is unnecessary).
NOTICE
4
Left
" "
When
in Menu move to previous option.
When playing music photos or videos, move to previous file.
3
Down
" "
When in Menu, move to previous option.
When playing music, photos or video, move to previous file.
When
in Menu, scroll the file down.
When
playing videos, rewind.
When
in Menu, move to next option.
When playing music photos or videos, move to next file.
Power
Esc
Flip
Menu
Up
Left
Right
Down
Brightness
Volume
Mute
Enter
1
8
2
9
3
10
4
11
5
12
6
13
7
14
POWER
6
POWER " "
7
MENU
MENU " "
Press to turn on the projector (green light).
Long press to turn off the projector (red light).
Exit
and go back to main menu.
When
in Menu, confirm the selected option.
5
Right
" "
When
in Menu, move to next option.
When playing music, photos or video, move to next file.
When in Menu, scroll the files down,
when playing videos, rewind.
When in Menu, confirm the selected option.
Exit
and go back to main menu.
When in Menu, scroll the files up.
When playing videos, fast forward.
AV cable
AV out
Connection type
may vary
AV input
HD digital
camcorder