Summary of FAY-002
Page 1
Industrial motherboard fay-002.
Page 2
Ii e10706 first edition july 2015 copyright notice this document is copyrighted, 2015. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, tra...
Page 3
Iii contents chapter 1 product overview 1-1 1.1 package contents......................................................................... 1-1 1.2 features ........................................................................................ 1-1 1.3 specifications ....................................
Page 4
Iv 3.4.1 north bridge .................................................................... 3-8 3.4.2 south bridge ................................................................... 3-8 3.5 security menu .............................................................................. 3-9 3.5.1 adminis...
Page 5: 1.1
1-1 chapter 1: general information 1.1 package contents check your industrial motherboard package for the following items. 1 x industrial motherboard if any of the above items is damaged or missing, contact your distributor or sales representative immediately. 1.2 features • intel ® j1900/n2807 bay ...
Page 6: 1.3 Specifications
Fay-002 1-2 1.3 specifications system form factor epic cpu j1900, bay trail-d / m (4c @ 2ghz cpu, 688 (turbo) gfx, ~10w tdp) n2807, bay trail-d / m (2c @ 1.58ghz cpu, 750 (turbo) gfx, ~4.3w tdp) memory 1 x so-dimm, max. 8gb, ddr3l 1333 mhz i/o chipset fintek 81866d-i ethernet 2 x realtek pcie gb lan...
Page 7
1-3 chapter 1: general information display chipset intel® graphics media accelerator resolution up to 1920x1200@60hz for vga up to 1920x1200@60hz for displayport up to 1920x1200@60hz, dual channel 24-bit (via ch7511) for lvds output interface 1 x lvds 1 x vga 1 x displayport i/o rear i/o (low profil...
Page 8
Fay-002 1-4.
Page 9: Chapter 2
2-1 chapter 2: motherboard information chapter 2 motherboard information 2.1 before you proceed take note of the following precautions before you install motherboard components or change any motherboard settings. Caution! • unplugthepowercordfromthewallsocketbeforetouchingany component. • beforehand...
Page 10: 2.2
Fay-002 2-2 alc 887 aafp1 lvds1 super i/o mini_card1 dp_head1 mini_card2 j1 11.5cm(4.53in) 16.5cm(6.5in) ddr3l_dimm_a1 (64bit, 204-pin module) dc_pwr1 lan1 dp1 lan2 usb3_1 usb2_23 f_panel spdif_out1 amp_con1 j2 j4 clrtc j3 led1 led2 cha_fan1 sata3g_2 sata3g_1 com2 com3 dio1 usbhub_56 usbhub_34 asm14...
Page 11
2-3 chapter 2: motherboard information connectors/jumpers/slots page 1. Chassisfanconnectors(4-pincha_fan1) 2-15 2. Ps/2keyboardandmouseconnector(kbms1) 2-22 3. Minicardconnector(mini_card1,mini_card2) 2-19 4. Frontpanelaudioconnector(10-1pinaafp1) 2-15 5. Audioamplifierconnector(4-pinamp_con) 2-23 ...
Page 12: 2.3
Fay-002 2-4 2.3 screw size 2.3.1 component side.
Page 13: 2.3.2
2-5 chapter 2: motherboard information 2.3.2 solder side.
Page 14: 2.4
Fay-002 2-6 2.4 central processing unit (cpu) thismotherboardcomeswithanintel®j1900/n2807processor. Fay-002 cpu socket j1900 j1900 2.5 system memory fay-002 204-pin ddr3l dimm socket dimm_a1 thismotherboardcomeswithtwodoubledatarate3lowvoltage(ddr3l) smalloutlinedualinlinememorymodules(so-dimm)socke...
Page 15: 2.5.1
2-7 chapter 2: motherboard information 2.5.1 installing a dimm to install a so-dimm to remove a so-dimm 3 2 3 2.
Page 16: 2.6 Jumpers
Fay-002 2-8 2.6 jumpers 1. Clear rtc ram (clrtc) thisjumperallowsyoutocleartherealtimeclock(rtc)ramincmos. Youcanclearthecmosmemoryofsystemsetupparametersbyerasing thecmosrtcramdata.Theonboardbuttoncellbatterypowerstheram dataincmos,whichincludesystemsetupinformationsuchassystem passwords. To erase ...
Page 17
2-9 chapter 2: motherboard information fay-002 com2 ring/+5v/+12v selection 5 6 3 4 1 2 +12v +5v ring (default) j1 fay-002 inverter voltage selection 1 2 2 3 +5v (default) +12v j2 2. Com1 ring/+5v/+12v selector (6-pin j1) 3. Inverter voltage selection (3-pin j2) setting pins +12v 1-2 +5v 3-4 ring(de...
Page 18
Fay-002 2-10 fay-002 lvds panel voltage selection 1 2 2 3 +3v (default) +5v j4 setting pins +5v 1-2 +3v(default) 2-3 5. Lvds panel voltage selection (3-pin j4) fay-002 mode selection for back light control of inverter pwm ctl dc ctl (default) 1 2 2 3 j3 4. Inverter backlight control of inverter sele...
Page 19: Fay-002 Onboard Leds
2-11 chapter 2: motherboard information fay-002 onboard leds sb_pwr1 on standby power powered off off main power main power off sb_pwr2 on off 1. Standby power led themotherboardcomeswithastandbypowerledthatlightsuptoindicate thatthesystemison,insleepmode,orinsoft-offmode.Thisisareminder that you sh...
Page 20: 2.8 Connectors
Fay-002 2-12 2.8 connectors 2.8.1 rear panel connectors lan port speed led activity link led act/link led speed led status description status description off nolink off 10mbpsconnection orange linked orange 100mbpsconnection blinking dataactivity green 1 gbps connection 2 1 3 4 6 5 1. Displayport co...
Page 21
2-13 chapter 2: motherboard information 5. Com port. This9-pincomportisforpointingdevicesorotherserialdevices 6. Dc power connector.Insertthepoweradapterintothisport...
Page 22: 2.8.2
Fay-002 2-14 important: • werecommendthatyouuseapsuwithhigherpoweroutputwhen configuringasystemwithmorepower-consumingdevices.Thesystem may become unstable or may not boot up if the power is inadequate. 2.8.2 internal connectors 1. 12vdc power connectors (2-pin pwr1) thisconnectorisfora12vdcpowersup...
Page 23
2-15 chapter 2: motherboard information caution: do not forget to connect the fan cables to the fan connectors. Insufficientairflowinsidethesystemmaydamagethemotherboard components.Thesearenotjumpers!Donotplacejumpercapsonthefan connectors! 2. Chassis fan connectors (4-pin cha_fan1) connectthefancab...
Page 24
Fay-002 2-16 4. System panel connector (10-1 pin f_panel) thisconnectorsupportsseveralchassis-mountedfunctions. • systempowerled(2-pinpwr_led) this2-pinconnectorisforthesystempowerled.Connectthechassis powerledcabletothisconnector.Thesystempowerledlightsupwhen youturnonthesystempower,andblinkswhenth...
Page 25
2-17 chapter 2: motherboard information 6. Sata power connector (4-pin sata_pwr1) thisconnectorisforthesatapowercable.Thepowercableplugis designedtofitthisconnectorinonlyoneorientation.Findtheproper orientationandpushdownfirmlyuntiltheconnectorcompletelyfit. Fay-002 sata power connector sata_pwr1 +5...
Page 26
Fay-002 2-18 fay-002 lvds connector lvds1 pin 1 vcon(pwm or dc) lvds1_d0- lvds1_d0+ gnd lvds1_d1- lvds1_d1+ gnd lvds1_d2- lvds1_d2+ smb_clk_s lvds1_d3- lvds1_d3+ gnd lvds1_clk- lvds1_clk+ enabkl lvds0_d0- lvds0_d0+ v_panel(power) lvds0_d1- lvds0_d1+ v_panel(power) lvds0_d2- lvds0_d2+ smb_dat_s lvds0...
Page 27: Fay-002 Usb2.0 Connectors
2-19 chapter 2: motherboard information 10. Usb 2.0 connector (10-1 pin usbhub_34, usbhub_56) theseusbconnectorscomplywithusb2.0specifications. Fay-002 usb2.0 connectors gnd gnd s_usb_pp5 s_usb_pn5 5v_usb 5v_usb s_usb_pn6 s_usb_pp6 gnd gnd usbhub56 pin 1 gnd gnd s_usb_pp3 s_usb_pn3 5v_usb 5v_usb s_u...
Page 28
Fay-002 2-20 fay-002 bios programmable connector pin 1 spi gnd spi_clk_f spi_si_f (nc) +v3.3spi spi_cs0#_f spi_so_f (nc) 11. Bios programmable connector (8-pin spi) usethisconnectortoflashthebiosrom. 124. Digital i/o connector (10-pin dio1) thisconnectorincludes8i/olines(in/outprogrammable).Allofthe...
Page 29
2-21 chapter 2: motherboard information 13. Serial port connectors (10-1 pin com2, com3) theseconnectorsareforserial(com)ports.Connecttheserialportmodule cabletothisconnector,theninstallthemoduletoaslotopeningattheback of the system chassis. Note: • thecommoduleispurchasedseparately. • com1alsosuppo...
Page 30
Fay-002 2-22 fay-002 series ps/2 keyboard/mouse connector pin 1 kbms1 o_ms_clk_r 5vsb o_kb_clk_r o_ms_data_r gnd o_kb_data_r 14. Ps/2 keyboard/mouse connector (6-pin kbms1) thisconnectorisforanibmps/2-compatiblekeyboardormouse. Fay-002 vga connector pin 1 vga1 5v_dvi gnd nc rddca_data_r r_hsync r_vs...
Page 31
2-23 chapter 2: motherboard information 16. Battery connector (2-pin battery1) thisconnectorisforthelithiumcmosbattery. Fay-002 battery connector gnd +bat pin 1 battery1 17. Audio amplifier connector (4-pin amp_con) thisconnectorisforanexternalaudioamplifier. Fay-002 audio stere. Output with amp con...
Page 32
Fay-002 2-24 18. Digital audio connector (4-1 pin spdif_out) thisconnectorisforanadditionalsony/philipsdigitalinterface(s/pdif) port.Connectthes/pdifoutmodulecabletothisconnector,theninstallthe module to a slot opening at the back of the system chassis. Fay-002 digital audio connector spdif_out pin1...
Page 33: Chapter 3
3-1 chapter 3: bios setup chapter 3 bios setup 3.1 bios setup use the bios setup to update the bios or configure settings. The bios screens include navigation keys and help to guide you in using the bios setup program. Entering bios setup at startup to enter bios setup at startup: press during the p...
Page 34: 3.1.1
3-2 fay-002 3.1.1 menu bar the menu bar on top of the screen has the following main items: main for changing the basic system configuration. Advanced for changing the advanced system settings. Chipset for viewing and changing chipset settings. Security for setting up bios security settings. Boot for...
Page 35: 3.3
3-3 chapter 3: bios setup 3.3 advanced menu the advanced menu items allow you to change the settings for the cpu and other system devices. Be cautious when changing the settings of the advanced menu items. Incorrect field values can cause the system to malfunction. 3.3.1 power management power mode ...
Page 36: 3.3.2
3-4 fay-002 the following items appear when wake system with dynamic time is enabled. Wake up minute increase [1] specify the number of minutes added to the current time before waking up system. 3.3.2 cpu configuration the items in this menu show cpu-related information. Socket 0 cpu information dis...
Page 37: 3.3.5
3-5 chapter 3: bios setup output level [low] configuration options: [high] [low] 3.3.5 trusted computing the items in this menu allow you to modify trusted computing settings. Security device support [disabled] enables or disables bios support for security device, which will not be displayed in the ...
Page 38: 3.3.8
3-6 fay-002 segment 1~5 speed (pwm) input fan speed in pwm duty-cycle. Input value range: [0~100] the following item replaces segment 1~5 speed (pwm) when chassis smart fan control is set to [auto by rpm]. Segment 1~5 speed (%) input fan speed percentage. Input value range: [0~100] full speed count ...
Page 39
3-7 chapter 3: bios setup sata speed support [gen2] allows you to select the sata speed. Configuration options: [gen1] [gen2] serial-ata port 1~2 [enabled] allows you to enable or disable serial-ata ports. Configuration options: [enabled] [disabled] sata port 0/1 hotplug [disabled] configuration opt...
Page 40: 3.4
3-8 fay-002 3.4 chipset menu the chipset menu items allow you to change configuration options for the north bridge and south bridge. 3.4.1 north bridge max tolud [2gb] allows you to select more useable memory on x86 os. If you use external graphic card, set this option to 2gb. Configuration options:...
Page 41: 3.5
3-9 chapter 3: bios setup usb 2.0 (ehci) support [disabled] this item becomes configurable when you set the previous item to [disabled] and allows you to enable or disable usb2.0 (ehci) support. Configuration options: [disabled] [enabled] pci express port 0~3 [enabled] configuration options: [disabl...
Page 42: 3.6
3-10 fay-002 to set a user password: 1. Select the user password item and press . 2. From the create new password box, key in a password, then press . 3. Confirm the password when prompted. To change a user password: 1. Select the user password item and press . 2. From the enter current password box...
Page 43: 3.7
3-11 chapter 3: bios setup boot override these items displays the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device. 3.7 save & exit menu save changes and reset on...
Page 44
3-12 fay-002.
Page 45: Chapter 4
4-1 chapter 4: block diagram r1.05 chapter 4 block diagram r1.05 4.1 block diagram r1.05 hnusb 2.0x4 j1900 kb/ms integrated clock gen. Tpm ddr3 1333 4 ports at mid-board usb 2.0 4 x rs-232/422/485 at back io supports (com1)5v/12v spi flash 64mbit hnusb 2.0x4 hub rj45 connector system fan mini card(f...
Page 46: Appendix
Fay-002 a-1 appendix notices federal communications commission statement this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: • this device may not cause harmful interference. • this device must accept any interference received including interfere...
Page 47
A-2 fay-002 電子信息產品污染控制標示：圖中之數字為產品之環保使用期限。僅指電子 信息產品中含有的有毒有害物質或元素不致發生外洩或突變從而對環境造成 污染或對人身、財產造成嚴重損害的期限。 部件名稱 有害物質或元素 鉛 (pb) 汞 (hg) 鎘 (cd) 六 價 鉻 (cr(vi)) 多 溴 聯 苯 (pbb) 多 溴 二 苯 醚 (pbde) 印 刷 電 路 板 及 其 電子組件 × ○ ○ ○ ○ ○ 外 部 信 號 連 接 頭 及線材 × ○ ○ ○ ○ ○ 有毒有害物質或元素的名稱及含量說明標示： ○： 表示該有毒有害物質在該部件所有均質材料中的含量均在 sj/t 1136...