1. DL manuals
  2. FBII
  3. Security System
  4. LEGEND SERIES
  5. Owner's Manual

FBII LEGEND SERIES Owner's Manual

Summary of LEGEND SERIES

  • Page 2: Introduction

    Introduction congratulations on your decision to protect your home or business with the legend security system. The system has been designed with reliability and ease of operation in mind. Please take a few minutes to review the contents of this manual. In order to realize the full potential of this...

  • Page 3: Keypad Operation

    Keypad operation 2- low battery the keypad contains everything necessary to operate your legend security system. The keypad has the following appearance; 13 14 led keypad layout \ 1 - zone status 7 the indicator lights marked 1-16 display the current status of the zones connected to your legend secu...

  • Page 4

    9- ac indicator this light indicates that ac power is connected to the security system. Battery backup exists to operate the system in the event of a power failure. 10- arm/disarm indicator this light indicates whether the system is currently armed (on) or disarmed (off). In addition to this constan...

  • Page 5

    Arming the system arming the system will activate all portions of your security system. Arming can only be performed if all zones are ready. For example, if a protected door is open the system cannot be armed. System ready the system is ready to be armed if the ready indicator light located in the d...

  • Page 6: Instant

    Instant bypass bypasses are performed to eliminate burglary zones that are the instant mode arms the system and eliminates the entry not ready or faulty from activating the security system. Time delay interval. If anyone enters through an entry/exit zone the alarm system will instantly activate. Byp...

  • Page 7

    To immediately arm the system enter [user] after the last zone bypass. Forced arming forced arming is a method that will automatically bypass all zones that are not ready and arm the system. Forced arming procedure; bypass [user] bypass depress the bypass key followed by your user code and the bypas...

  • Page 8

    Keypad emergency conditions in addition to individual zone alarms various conditions can be transmitted directly through the keypad. These conditions are initiated through the simultaneous depression of two keys, as shown below; reset keypad condition 2 led keypad layout keypad condition 1 the keypa...

  • Page 9: User Definition

    User definition user definition procedure: code [user][us#][us#][usld][usld][lev][lev] users can be entered or modified directly through the keypad. Where; the legend security system can maintain up to sixteen different [user] is your four digit user code. Users. The capability to modify user inform...