- DL manuals
- FBII
- Security System
- XL-2T
- User Manual
FBII XL-2T User Manual
Summary of XL-2T
Page 1
X x l l - - 2 2 t t security system user guide n9819v3 2/00 fire burglary instruments, inc..
Page 2: Table of Contents
- 2 - table of contents quick reference....................................................................................................................... 3 introduction ............................................................................................................................ 5...
Page 3: Quick Reference
- 3 - quick reference to turn system on 1. Check to make sure the system is ready, (green ready light is lit † ). 2. Enter your 4-digit user code. 3. Exit through a door designated by your installer as an exit/entry door. 4. The on/off (arm) light will light. To turn system off 1. Enter through a do...
Page 4
- 4 - the on/off (arm) light, the instant light, and the stay light will all be on. To reset smoke detector 1. Enter your 4-digit user code. = ready light is not available on all keypads..
Page 5: Introduction
- 5 - introduction congratulations on your decision to protect your home or business with the xl-2t security system. You have chosen a reliable, state- of-the-art security system that is remarkably easy to operate. Your system has been professionally installed by your local security company whose re...
Page 6: System Reference
- 6 - system reference zone descriptions in the following table, enter a description of the area of protection for each zone. Example: zone 1 windows on north side of building zone 4 main entrance to building. Zone description 1 2 _______________________________________ 3 4 5 6 7 entry time ________...
Page 7
- 7 - = buttons on xl-4600sm keypad only.
Page 8: System Reference
- 8 - system reference (cont) user code assignments in the following table, enter the names of the individuals assigned to each specific user id number. User id assigned to 1 (master user * ) 2 (master user * ) 3 4** 5 6 7 8 9 10 11 12 13 door strike - yes no if no ______________________ (if user 13...
Page 9: Turning The System On
- 9 - account # telephone # turning the system on is the system ready? You can turn the burglar portion of your security system on and off. Before you can turn the system on, it must be “ready.” if you have a protected door open, or someone is moving in view of a motion detector, the system will not...
Page 10: Turning The System On
- 10 - turning the system on (cont) to turn system on and leave enter your 4-digit user code. The system on, (arm) light will go on or the display will show: on: away ........ Exit through a door designated by your installer as an exit/entry door. You must leave within the exit time programmed by yo...
Page 11: Turning The System On
- 11 - turning the system on (cont) note: this system can be programmed by the installer for the auto-stay feature which automatically bypasses interior zones if you arm the system and do not exit through a delay zone during exit time. To turn system on in instant mode in instant mode, all alarm sen...
Page 12: Turning The System Off
- 12 - turning the system off when you turn the system off, you turn off only the burglar portion of your system; any smoke or heat detectors and panic keys will remain on. You must enter through a designated entry door and turn off the system within the time allowed. You can have different amounts ...
Page 13: User Codes
- 13 - user codes to add or change a user code users can be added or changed directly at the keypad. Your system can have up to 15 different user codes. Users #1 and #2 are the only users allowed to add or delete other user codes. To add or change a user code, press the code button followed by user ...
Page 14: Miscellaneous Commands
- 14 - miscellaneous commands send help alerts your system can be programmed for 3 separate keypad send help alerts that would send an emergency signal to your central station. See the system reference sheet to see which have been programmed for your system. Duress your system can be programmed to s...
Page 15: Miscellaneous Commands
- 15 - miscellaneous commands (cont) turn chime on/off chime is an optional feature that causes the keypad to chime when selected doors are opened while the burglary protection is off or disarmed. Only your installer can program a zone for the chime feature. Once programmed, you can turn chime on or...
Page 16: Testing The System
- 16 - testing the system system test it is recommended that you test your system once a week using the following procedure: note: if your system is monitored, contact your central station before you perform this test. 1. Turn your security system on. 2. Wait until your exit time is over. Then activ...
Page 17
- 17 - national fire protection association recommendations on smoke detectors with regard to the number and placement of smoke/heat detectors, we subscribe to the recommendations contained in the national fire protection association’s (nfpa) standard #72 noted below. Early warning fire detection is...
Page 18: Emergency Evacuation
- 18 - emergency evacuation establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the national fire protection association: 1. Position your detector or your interior and/or exterior sounders so that they can be heard by all occupants. 2. Dete...
Page 19
- 19 -.
Page 20: Glossary
- 20 - glossary ac indicator: small green power on/off light between the center buttons on the keypad. When lit, the system is running on primary power; when not lit, the system is running off the backup battery. Alarm: sound from keypad or other horn/siren indicates a burglar alarm, fire alarm, or ...
Page 21: Glossary
- 21 - glossary (cont) exit delay: the period of time allowed between turning the system on and leaving through a designated exit/entry door before the system will register an alarm condition. This is determined at the time of installation. Interior zone: an interior zone is a group of points that p...
Page 22: Glossary
- 22 - glossary (cont) sensor: the actual alarm sensor, detector, or device installed to detect an intrusion, fire, or environmental problem. Examples include: door contacts, window contacts, motion sensors, glassbreak sensors, smoke detectors, rate-of-rise heat detectors, temperature sensors, flood...
Page 23
- 23 - federal communications commission (fcc) statement this equipment has been tested to fcc requirements and has been found acceptable for use. The fcc requires the following statement for your information: this equipment generates and uses radio frequency energy and if not installed and used pro...
Page 24
- 24 - service. The user may not under any circumstances (in or out of warranty) attempt any service or repairs to the system. It must be returned to the factory or an authorized service agency for all repairs. This control unit was manufactured under rigid quality standards and complies with all ul...
Page 25
- 25 - limitations of this alarm system while this system is an advanced design security system, it does not offer guaranteed protection against burglary, fire, or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reaso...
Page 26
- 26 - material on the mirrors, windows, or any part of the optical system can reduce their detection ability. Passive infrared detectors sense changes in temperature; however, as the ambient temperature of the protected area approaches the temperature range of 90 degrees to 150 degrees fahrenheit, ...
Page 27
- 27 - limitations of this alarm system (cont) alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers who are located on the other side of closed or partly open doors. If warning devices sound on a different level of the residence from the bedrooms, then they a...
Page 28: Limited Warranty
- 28 - limited warranty fire burglary instruments, inc., a subsidiary of pittway corporation, and its divisions, subsidiaries and affiliates ("seller"), 149 eileen way, syosset, new york 11791, warrants its security equipment (the "product") to be free from defects in material and workmanship for on...
Page 29
- 29 - warranty or otherwise, regardless of cause or origin, seller's maximum liability shall not in any case exceed the purchase price of the product, while shall be the complete and exclusive remedy against seller. This warranty gives you specific legal rights, and you may also have other rights w...
Page 30
Ên9819v3ÆŠ n9819v3 2/00 fire burglary instruments, inc. Subsidiary of pittway corporation 149 eileen way, syosset, new york 11791.