Fbt PSR 230 Specifications
FBT PSR 230 Premium Sound Reinforcement Series Speaker
Applications
•
Live Sound Reinforcement, Fixed Installations,
•
Touring Systems, Discos, Clubs, Auditoriums,
•
Theatres, Houses of Worship, Mobile DJ
Features
•
13 ply Trapezoidal Baltic Birch plywood construction cabinet,
•
Internally braced to eliminate cabinet vibrations
•
Tour Grade scratch resistant black paint finish
•
Integral ergonomic carrying handles for easy transportability
•
Six M - 10 fly points
•
High SPL capability: 137 dB
•
800 w RMS, 1600 w Program @ full range operation
•
Switchable internal crossover for full range or bi amp operation
Product Description
The FBT PSR 230 Speaker features 13 ply Baltic Birch plywood construction cabinetry in a trapezoidal design, internally
braced to prevent undesirable cabinet vibrations.
A rugged touring grade scratch resistant black paint finish protects the cabinet exterior.
A heavy duty perforated steel grille provides protection for the woofers and horn. Strategically placed integrated carrying
handles built into the cabinet lend to easy transportability. Six ATM manufactured M-10 fly points are provided allowing single
speaker or multiple speaker cluster suspension.
The FBT PSR 230 is of two-way bass reflex design incorporating Two Italian manufactured 15” FBT proprietary design low
frequency woofers with 4” voice coils with aluminum windings and a 3” B&C titanium compression driver coupled to a B&C
Aluminum 60° x 40° horn with a 2” exit. The internal crossover is constructed with a military grade dual flooded fiberglass
circuit board utilizing military spec components including metallized polyester condensers, and large diameter choke coils. All
crossover components are embedded in a special resin to ensure total imperviousness to vibrations in operation and shock
transmitted by mechanical impacts when transporting. The internal crossover allows either full range or bi amplified
operation by means of a jumper located internally on the crossover unit on the underside of the rear control panel input plate.
This type of selectable crossover frequency design provides against accidental crossover settings when either full range or bi
amplified operation is desired. When used in full range operation, the internal crossover frequency is preset at 1.3khz (24dB
oct). Recommended amplifier power output when used in full range operation is 1600w RMS total and 1600 w RMS LF, 160
w RMS HF when operated in bi amp mode. A sensitivity factor of 102dB applies in full range mode and 102 dB LF, 108 dB
HF in bi amp mode. Frequency response is an ample 40Hz - 18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBT’s S.T.E.P.® (soft trip electronic
protection) circuitry ensures correct speaker operation even in overdriven conditions.
Specifications
System Type: 2 - way
Dispersion: 60° H x 40° V
Components: Two 15” proprietary woofers, 3” B&C HF driver
Protection: FBT S.T.E.P.® Protection Circuitry
Frequency Response: 40Hz - 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 4 ohms
Suspension Points: 6 - M-10
Power Handling: 800w RMS, 1600w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 102 dB @ 1 watt, 1 meter (full range)
Dimensions: 20.60”w x 51.60” h x 19.40” d
Maximum
SPL:
137dB
(full
range)
Net
Weight:
170
lbs.
Internal
Crossover
Frequency:
1.3
kHz
Shipping
Weight:
198
lbs.