Summary of ST50
Page 1
Pda software user’s manual for use with fci’s st50 and st75 mass flowmeter doc. 06en003372 rev. -.
Page 2
Fluid components international llc st50/st75 pda software important: please read the end user software license agreement with this product before using the accompanying software program(s). Using any part of the software indicates that you accept the terms of the end user software license agreement....
Page 3
Fluid components international llc st50/st75 pda software about this manual this manual is designed to quickly familiarize you with the use of the configuration software. It describes all you need to know to effectively use the configurator during the commissioning, operational, and maintenance phas...
Page 4
Fluid components international llc st50/st75 pda software chapter 1 setting up the configuration software for use with your handheld pda the configuration software enables you to communicate with the st50/st75 flowmeter through the irda wireless link or the use of a rs232 cable. The configuration so...
Page 5
Fluid components international llc st50/st75 pda software step2: setting up the configuration software preferences • if you are going to be communicating with the st50/st75 through the irda link, you need do nothing. The instructions in this step are to be use only if you are going to use other than...
Page 6
Fluid components international llc st50/st75 pda software step3: connecting to the st50/st75 the recommended method for connecting to the st50/st75 with the configuration software is by means of the ir link. Ir interface: for best results on establishing a good ir link between the st50/st75 and the ...
Page 7
Fluid components international llc st50/st75 pda software chapter 2 using the configuration software to setup the st50/st75 • the configuration software provides access to the 8 instruments setup functions of the st50/st75. This chapter will show you how to use these 8 setup functions of the st50/st...
Page 8
Fluid components international llc st50/st75 pda software reading and setting the kfactors • from the setup menu tap on the “kfactor” button to open the setup screen for the kfactors. • tap on the “get all” button to read the current setup of the st50/st75. • select the fields you want to change, en...
Page 9
Fluid components international llc st50/st75 pda software configuring and setting up the pulse output channels • the pulse output channels are used to provide totalizer and process alarm information. Totalizer information is provided as a voltage pulse, and alarm information is provided as a voltage...
Page 10
Fluid components international llc st50/st75 pda software chapter 3 using the configuration software to read the st50/st75 process information the configuration software provides access to 3 process parameters monitored by the st50/st75 flow meter; these parameters are process flow, process temperat...
Page 11
Fluid components international llc st50/st75 pda software chapter 4 using the configuration software to read the st50/st75 id information the configuration software provides access to st50/st75 manufacturing information, such as unit serial number, st50/st75 firmware version, user name and shop orde...
Page 12
Fluid components international llc st50/st75 pda software chapter 5 using the configuration software to access the st50/st75utilities functions the configuration software gives access to the five st50/st75 utility functions. These functions help to check the calibration and configuration parameters,...
Page 13
Fluid components international llc st50/st75 pda software using the configuration software to display and set the calibration values of the st50/st75 • from the utilities menu tap on the “calibration values” button to open the calibration parameters screen. • tap on the “get all” button to read the ...
Page 14
Fluid components international llc st50/st75 pda software chapter 6 using the configuration software to access the st50/st75 diagnostic functions the configuration software gives access to three st50/st75 diagnostic functions. These functions help in troubleshooting the st50/st75 operation, when a p...
Page 15
Fluid components international llc st50/st75 pda software appendix a using the configuration software quick users guide –ir operation set the jp5 jumper on the st50/st75 in the “ir” position. This jumper is located under the bezel on the lcd display board. The “ir” jumper position is located closest...
Page 16
Fluid components international llc st50/st75 pda software appendix b list of configuration software commands the following is a summary list of configuration software commands: process – displays process data, no sub menus. Unit id – display instrument manufacturing information, no sub menus. Setup ...
Page 17
Fci’s complete customer commitment. Worldwide iso 9001:2000 and as9100 certified notice of proprietary rights this document contains confidential technical data, including trade secrets and proprietary information which is the property of fluid components international llc (fci). Disclosure of this ...