Model • dyna twc 901 • dyna twc 902 operating manual (owner’s manual) important: read these instructions before installing, operating, or servicing this system. First edition manual no. Et001.
- 1 - dyna twc 901、902 operating manual contents symbol legend---------------------------------------------------------------------------------------------------2 statement of warranty------------------------------------------------------------------------------------3 1.0 general information-------...
- 2 - dyna twc 901、902 operating manual symbol legend a amperage stick (smaw) v voltage pulse current function (gtaw) hz hertz (frequency) t spot time (gtaw) sec seconds remote outputs control (panel/remote) % percent remote function dc (direct current) arc control (smaw) ac (alternating current) t ...
- 3 - dyna twc 901、902 operating manual statement of warranty limited warranty: "fcw" warrants to customers of its authorized distributors hereafter "fcw" that its products will be free of defects in workmanship or material. Should any failure to conform to this warranty appear within the time perio...
- 4 - dyna twc 901、902 operating manual 1.0 general information 1.01 notes, cautions and warnings throughout this manual, notes, cautions, and warnings are used to highlight important information. These highlights are categorized as follows: note an operation, procedure, or background information wh...
- 5 - dyna twc 901、902 operating manual electric shock electric shock can injure or kill. The arc welding process uses and produces high voltage electrical energy. This electric energy can cause severe or fatal shock to the operator or others in the workplace. L never touch any parts that are electr...
- 6 - dyna twc 901、902 operating manual 1.03 transporting methods these units are equipped with a handle for carrying purposes. Warning: electric shock can kill. Do not touch live electrical parts. Disconnect input power conductors from de-energized supply line before moving the welding power source...
- 7 - dyna twc 901、902 operating manual 2.0 installation recommendation installation environment dyna twc series is designed for use in hazardous environments. Examples of environments with increased hazardous environments are - in locations in which freedom of movement is restricted, so that the op...
- 8 - dyna twc 901、902 operating manual 3.0 operator controls figure 1 1. Input water fitting— fitting size 5/8” – 18 lh female. 2. Output water fitting— fitting size 5/8” – 18 lh female. 3. Input cable— 3 meter. 4. Fuse 5. Water reading 6. Main power switch— switching to the on position power sourc...
- 9 - dyna twc 901、902 operating manual 4.0 specifications model twc 901 twc 902 input voltage 110v 1ph 50/60hz 220v 1ph 50/60hz input current 3.4a 1.7a duty cycle (40ºc) 100% 100% flow 3.0l/min 3.0l/min pressure 0.121mpa 0.121mpa capacity 7litre 7litre weight 15kg 15kg dimensions (mm) 530*260*320mm...
- 10 - dyna twc 901、902 operating manual figure 2.
- 11 - dyna twc 901、902 operating manual qty. Twc 901 twc 902 sequ ence name order no p/n: 638003999 p/n: 638004999 1 label in/out twc902 2lau8801000 1 1 2 label water level twc 801/802/901/902 2lax8804000 1 1 3 label main switch twc 801/802/901/902 2lax8806007 1 1 4 label manufacturers rating twc 2...
- 12 - dyna twc 901、902 operating manual 6.0 remark 6.1 water cooler rear panels meet the plume to have good to turn on the earth grounding, by guarantees the welder safety. When welder operation, should wear protects the mirror, the glove, puts on protects the clothing. 6.2 ambient temperatures hig...
