FDI ELI70-CR Quick Start Manual - page 4
ELI70-CR Quick Start Guide
Page
4
9/18/2014
Copyright ©2014, Future Designs, Inc.
Revision 1.2
3. Technical Specifications
• Screen Size: 7.0 inches (diagonal)
• Display Technology: a-Si TFT LCD
• Resolution: 800 x 480 (WVGA)
• Brightness: 280 cd/m2 (typ)
• Contrast Ratio: 500 : 1 (typ)
• Aspect Ratio: Wide 15:9
• Interface Input Mode: HDMI / DVI
• Colors: 16.7M (24 bit)
• Horizontal Viewing Angle: 70° L/R
• Vertical Viewing Angle: 60° U / 70° D
• Surface: Anti-glare
• Reverse Scan: U/D, L/R
• Touch Screen: 4-wire Resistive
• Touch Screen Interface: USB Device
• Touch Panel Hardness: >3H
• Touch Panel Force: 100gF (max)
• Active Area: 154.08 (W) x 85.92 (H) mm
• Response Time: 25ms (typ)
• Backlight: 24 LED (3S x 8P)
• Backlight Life: 20K hours (typ)
• Backlight Power Consumption: 1.55W (typ)
• Operating Temperature: -20° to 70° C
• Storage Temperature: -30° to 80° C
• Input Voltage: +12VDC ±5%
• Power Consumption: 400mA @ 12V (typ)
• RoHS Compliant: Yes
• Dimensions: 164.9 (W) x 100.0 (H) x 22.6 (D) mm
• Mounting: #8 screw mounts in 4 corners
• Weight: 255 grams
4. Mechanical Specifications
● Tape used for the LCD to PCB Attachment: 3M VHB 4959 ½” width
● 4 screw holes on the ELI70-CR accept up to #8 size screws for mounting into an enclosure
● All 4 screw holes connect to the system ground directly.
● The exposed ground pads may be used to connect the ELI70_CR PCP directly to the LCD using copper or
aluminum foil tape to meet ESD requirements.