1. DL manuals
  2. FDI
  3. Microcontrollers
  4. ?YG-S7G2-70C-MDK
  5. User Manual

FDI ?YG-S7G2-70C-MDK User Manual

Manual is about: Modular

Summary of ?YG-S7G2-70C-MDK

  • Page 1

    Copyright ©2017, future designs, inc., all rights reserved user’s manual Σyg-s7g2-70c-mdk.

  • Page 2

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 2 of 26 important legal information information in this document is provided solely to enable the use of future designs, inc. (fdi) products. Fdi assumes no liability whatsoever, including infringement of any patent o...

  • Page 3

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 3 of 26 table of contents important legal information ......................................................................................................................................... 2 Σyg-s7g2-70c modular de...

  • Page 4

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 4 of 26 4.8 external i2c ................................................................................................................................................ 23 4.9 external i2s audio ........................

  • Page 5

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 5 of 26 Σyg-s7g2-70c modular development kit (mdk) overview 1.1 introduction the future designs, inc. Σyg tm family provides a complete and qualified graphical user interface (gui) / human machine interface (hmi) plat...

  • Page 6

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 6 of 26 1.3 renesas synergy s7g2 microcontoller block diagram figure 1: s7g2 system block diagram.

  • Page 7

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 7 of 26 1.4 Σyg-s7g2-70c-mdk system block diagram figure 2: Σyg-s7g2-70c kit block diagram.

  • Page 8

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 8 of 26 1.5 requirements the Σyg-s7g2-70c -mdk requires a carrier board with a 200-pin so-dimm socket. The socket should have the key at the 1.8v location. The carrier board from future designs provides this socket an...

  • Page 9

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 9 of 26 getting started 2.1 setting up the hardware the somdimm should be inserted into the dimm socket as shown below and then locked into place by pushing down to the carrier board. Ensure the somdimm is inserted co...

  • Page 10

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 10 of 26 2.2 demonstration software once the device is powered on, the demonstration software start menu will appear on the lcd screen. The software consists of the weatherpanel demonstration. 2.2.1 weatherpanel demon...

  • Page 11

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 11 of 26 2.3 software  pc with windows 7 or windows 10  e 2 studio integrated solution development environment (isde) from renesas  renesas synergy tm software package (ssp)  gnu tool chain for arm® cortex®-m mcus...

  • Page 12

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 12 of 26 3.2 tag connect j3 use the tag connect 10-pin cable to program and jtag the Σyg-s7g2 som using a segger j-link device. Cable: http://www.Tag-connect.Com/tc2050-arm2010 cable: http://www.Tag-connect.Com/tc2050...

  • Page 13

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 13 of 26 3.3.1 inserting the microsd card into the microsd socket first, prepare to insert the microsd card into the socket by positioning it with its text facing up. Position the ridge, or “lip”, of the card furthest...

  • Page 14

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 14 of 26 3.3.2 removing the microsd card from the microsd socket begin to remove the microsd card by gently pushing the card into the socket. The socket will “click” and eject the card. Once the microsd card is ejecte...

  • Page 15

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 15 of 26 3.5 200-pin somdimm connector details j4 pin somdimm signal name application details i/o somdimm connection details 1 eth_txp ethernet transmit positive o output from ksz8041 ethernet phy 2 eth_rxp ethernet r...

  • Page 16

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 16 of 26 pin somdimm signal name application details i/o somdimm connection details 53 gpio53_miso 54 gpio51_spck 55 gpio55 56 gpio56_mosi 57 gpio57_txd gpio / serial transmit data – for rs232 o connected to s7g2 port...

  • Page 17

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 17 of 26 pin somdimm signal name application details i/o somdimm connection details 104 nc not connected u unused 105 nc not connected u unused 106 nc not connected u unused 107 nc not connected u unused 108 nc not co...

  • Page 18

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 18 of 26 pin somdimm signal name application details i/o somdimm connection details 157 nc not connected u unused 158 nc not connected u unused 159 nc not connected u unused 160 gpio160_md 161 nc not connected u unuse...

  • Page 19

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 19 of 26 carrier board components 4.1 dc power input the touch screen kit utilizes a 5vdc 2.3a power supply. The connector is 2.1mm with center positive. Pin number description 1 5vdc, +/- 10%, 2.0a (min) 2 power supp...

  • Page 20

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 20 of 26 pin number description 1 usb 5v 2 d- 3 d+ 4 nc 5 signal ground 4.4 usb power host the carrier board includes one usb host port allowing the unit to interface to various usb peripherals such as a usb flash dri...

  • Page 21

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 21 of 26 4.5 ethernet the carrier board includes one 10/100 ethernet port to interface to a local area network via cat5 cable. Please refer to the specific details of the processor module being utilized for support of...

  • Page 22

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 22 of 26 4.7 rs232 the carrier board includes one rs232 serial port connector. This connector is a male db9 configured as either dce or dte (rev 2 and later only) depending on the configuration of jumper block jp3. Th...

  • Page 23

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 23 of 26 4.8 external i2c the carrier board provides an external i2c connector for users to connect to the i2c bus of the microprocessor. Carrier rev 2 and later pin number description 1 5v 2 5v 3 3.3v 4 3.3v 5 gpio75...

  • Page 24

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 24 of 26 Σyg-s7g2 system on module board layout 3.1 schematics visit this link for schematics of the syg-s7g2-som: http://www.Teamfdi.Com/wp- content/uploads/syg-s7g2-som.Pdf 3.2 mechanicals figure 6: s7g2 top figure ...

  • Page 25

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 25 of 26 figure 8: carrier board top.

  • Page 26

    Σyg-s7g2-70c-mdk user’s manual 6/26/2017 copyright ©2017, future designs, inc page 26 of 26 support 6.1 where to get help online technical support is available at http://www.Teamfdi.Com/support/. 6.2 useful links application notes: http://www.Teamfdi.Com/syg#syg-appnotes future designs, inc. Forums:...