FDS FD102CV-C-7-L Installation And Operation Manual - General Information
Document Number:
MAN
– FD102CV-C-7 (L/R)
Rev:
B
Revision Date:
05/05/2017
Page 3 of 12
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
General Information
The FD102CV-C-7-L/R is a special mission military monitor. It consists of two separate
parts, the LCD monitor and the articulating arm.
Built with retrofit aircraft integration in mind, this display can switch between two video
input sources using the buttons on the bezel. Additional functions are added using the 8
bezel keys. These functions are generated by the mission computer.
The arm has 2 pivot points which enable it to have a range of rotation up to 180° at each
pivot point. This monitor also tilt forward and AFT 20° in either direction and can rotate
45
left and right.
The LCD features NVG technology which can be switched to Day or Night mode using
the rocker switch. The NVG LCD filters out infrared rays in the 1000nm range.
Front View
Additional Information
The FD102CV-C-7-L/R is made of all metal components. The milled aluminium arm
represents the evolution of several design enhancements for an optimum mounting
solution.