FDS FD151CV-C-HT Installation And Operation Manual - Installation Instructions
Document Number:
MAN
– FD151CV-C-HT
Rev:
D
Revision Date:
05/05/2017
Page 4 of 11
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Specifications
Display Type
15” TFT Color LCD
Display Color
16.2 Million Colors
Screen Resolution
XGA 1024 x 768
Brightness
400 cd/m
2
Dimensions (w/ arm)
17.3”(W) x 16.2”(H) x 4.25”(D)
Display Size
13.8”(W) x 11.4”(H) x 1.6” (D)
Weight
7.1 lbs (monitor only)
9.0 lbs (monitor and arm)
Power (Monitor Only)
Power (Heater Only)
Power (Monitor & Heater)
28V DC @ 1.1 AMPS
28V DC @ 3.6 AMPS
28V DC @ 4.7 AMPS
Video Input
S-Video
Video Type Supported
NTSC/PAL
Screen Control
On Screen Display Menu
Viewing Angle
140 Horizontally, 125° Vertically
Materials
Aluminum
Operating Temperature
0-50° C (32-122° F)
DO-160 Testing
Section 21, Category B
Section 7, Category B
Installation Instructions
All cabin equipment, such as the FD151CV-C-HT, should be installed on a non-essential
bus and have a dedicated circuit breaker. It is a requirement that a switch be installed in
the cockpit so that the pilot can de-energize the system should it become necessary.
Power
This is a 28VDC monitor that requires 1.1 AMPS of power to operate. The unit turns on
automatically upon power application. See Operating Instructions below for more details.