FDS FD201CV-C-1 Installation And Operation Manual - Operation Instructions
Document Number:
MAN
– FD201CV-C-1
Rev:
E
Revision Date:
05/05/2017
Page 9 of 16
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Operation Instructions
The FD201CV-C-1 is continuously on but can be de-energized by removing power from
the entertainment system. No pilot or aircrew action is necessary during flight or ground
operation.
The operator will be able to change the video output from the FD201CV-C using the
video source select button on the display.
When applying 28VDC power, the display will turn on and look for a valid input on the
last known source. If no input is found, the display will go to standby mode. Pressing the
Select button will select new video input.
Button Controls
Located on the front bottom left of the FD201CV-C-1 are 8 buttons.
BUTTON DESCRIPTION
PWR
Turns ON/OFF the system.
MENU Activates the OSD menu or goes to previous menu.
AUTO
Auto-adjustment in RGB.
Moves the highlight icon up to the function that user
wants.
Moves the highlight icon down to the function that user
wants.
Decreases the adjustment of the selected function.
Increases the adjustment of the selected function.
SCE
Selects the Input Signal among analog RGB/S-
Video/Composite.