FDS FD50HMT Installation And Operation Manual - Operation Instructions
Manual is about: Advisory Information Display
of
12
Document Number:
MAN
– FD50HMT
Rev:
E
Revision Date:
06/30/2017
Page 8 of 12
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Operation Instructions
When the FD50HMT is powered up, it will search for a video input on the last known source. If
no video input is found, the display will go into standby mode. The FD50HMT is a single
source video display.
Button Controls
Located on the face of the display, are the following buttons, from left edge to right:
BUTTON
DESCRIPTION
PWR
Turn monitor ON/OFF
SEL
Selection
(Available Option: Source)
LEFT
Decreases the adjustment of the selected function
RIGHT
Increases the adjustment of the selected function
MENU
Opens the monitor setup menu. Enter sub-list. Return to
main list