FDS FD70CV-M-C-6 Installation And Operation Manual - Specifications
Document Number:
MAN
– FD70CV-M-C-6
Rev:
B
Revision Date:
05/05/2017
Page 4 of 13
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Specifications
Display Type
7” TFT Color LCD /Standard Arm
Supported Resolutions
640x480 ~ 1024x768
Native Resolution
800x480
Display Brightness
800 cd/ m
2
Contrast Ratio
500:1
Dimensions
6.80”(W) x 5.375”(H) x 1.535”(D)
LCD Dimension
6.00”(W) x 3.60”(H)
Weight
1 lb. 8 oz.
Viewing Angle
140°/120°
Power
28VDC @ .5 Amps
Operating Temperature
0-50° C (32-122° F)
PC Video Input
VGA (High Density DB-15 Receptacle
(Supplied w/Base))
Standard Video Input
2 Composite Video
Video Type Supported
NTSC, PAL
Screen Control
On-Screen Display Menu
Remote Control
IR, included
Materials
Aluminum
DO-160 Testing
Section 21, Category B
Installation Instructions
All cabin entertainment equipment, such as the FD70CV-M-C-6, should be installed on a
non-essential bus and have a dedicated circuit breaker. It is a requirement that a switch
be installed in the cockpit so that the pilot can de-energize the entertainment system
should it become necessary.
It is recommended that you leave approximately ¼ inch of space around the rear of the
display to have circulating air.
Power
This is a
12-28VDC
monitor that requires 0.3 Amps (@28V) to 0.6 Amps (@12V) of
power to operate.