1. DL manuals
  2. FEC
  3. Motherboard
  4. FEB-9455
  5. User Manual

FEC FEB-9455 User Manual

Manual is about: FEC FEB-9455 Motherboard Intel 945GME 5.25” ESB

Summary of FEB-9455

  • Page 1

    Feb-9455 intel 945gme 5.25” esb user’s manual rev.01, aug. 2009.

  • Page 2

    Feb-9455 user’s manual 2 all rights reserved. No part of this publication may be reproduced in any form or by any means, without prior written permission of the publisher. All trademarks are the properties of the respective owners. All product specifications are subject to change without notice. Non...

  • Page 3

    Feb-9455 user’s manual 3 contents chapter 1 product information .......................................................................................... 4 1.1 block diagram ................................................................................................................... 4 1.2 fea...

  • Page 4

    Feb-9455 user’s manual 4 chapter 1 product information this chapter introduces the product features, jumper and connector information. 1.1 block diagram intel lga775 intel 945g/gc vrd10/11 ck410 vga lvds_ch7308 fsb 533/800/1066mhz ddr2 400/533/667 mhz dmi s/io w83627ehg ide / cf usb x8 com1 spi dio ...

  • Page 5

    Feb-9455 user’s manual 5 1.2 features system processor / chipset processor intel lga775 socket, intel core 2 duo, pentium 4 processor in the 90 nm process in the lga775 land grid array package or pentium d processor (supports 775-land package) fsb 533/800 mhz (945g support 1066mhz) chipset intel 945...

  • Page 6

    Feb-9455 user’s manual 6 internal connector vga 1 lvds 1 lan 1 usb 2.0 8 com 6[3(rs232), 2(rs232, supply 5v/12v), 1(rs232/422/485, supply 5v/12v)] parallel 1 audio header 1(line-in, mic-in) audio amplifier 1 [6w(4Ω) stereo] compact flash 1 (bottom side) irda 1 ps2 1 (k/b by mcr) digital io 8bit gpio...

  • Page 7

    Feb-9455 user’s manual 7 1.3 pcb layout 5 1 1 5 1 4 7 1 4 7 1 2 4 3 4 4 6 5 1 2 1 2 12 11 8 7 1 2 1 4 4 4 1 2 10 9 2 9 3 0 2 1 3 4 2 8 7 6 5 4 3 2 1 1 14 13 2 6 1 2 9 10 1 2 9 10 1 5 2 6 1 5 2 6 10 2 9 1 10 2 9 1 5 9 6 0 2 1 1 6 1 6 jp2 jp3 sata_pwr1 sata1 sata2 jp1 inv1 ide1 lvds1 pwr1 bt1 cpufan1 ...

  • Page 8

    Feb-9455 user’s manual 8 1.4 jumper setting jp1：lcd power (+3.3v / +5v) select pin no. 1-2 2-3 function lcd power +3.3v (default) lcd power +5v jumper setting jp2：compact flash ( master / slave ) select pin no. 1-2 2-3 function master mode slave mode (default) jumper setting jp3：cmos clear pin no. 1...

  • Page 9

    Feb-9455 user’s manual 9 jp4：com2 (rs-232/rs-422/rs-485) select (1/3) pin no. 5-6, 11-13, 12-14, 19-21, 20-22 3-4, 9-11, 10-12, 17-19, 18-20 function rs-232 (default) rs-422 jumper setting jp4：com2 (rs-232/rs-422/rs-485) select (2/3) pin no. 1-2, 9-11, 10-12, 23-24 15-16 function rs-485 rs- 422 rx 1...

  • Page 10

    Feb-9455 user’s manual 10 1.5 connector function list connector function note audio1 6w amplifier line-out connector audio2 line-in, mic-in connector auxfan1 system fan 3-pin connector bt1 power button connector cf1 compat flash connector cpufan1 cpufan 4-pin connector com5,com6 serial port connecto...

  • Page 11

    Feb-9455 user’s manual 11 1.6 internal connector pin define audio1：audio amplifier output with box-header (2.0 mm) pin no. Signal 1 audio amplifier out right 2 ground 3 ground 4 audio amplifier out left audio2：audio signal connector with pin-header (2.0 mm) pin no. Signal 1 mic1-in-l 2 line1-in-l 3 ...

  • Page 12

    Feb-9455 user’s manual 12 com5, com6：serial port with box-header (2.0 mm) pin no. Signal pin no. Signal 1 dcd 2 dsr 3 rxd 4 rts 5 txd 6 cts 7 dtr 8 ri/+5v/+12v 9 ground 10 nc dio1：digital i/o connector with pin-header (2.54mm) pin no. Signal pin no. Signal 1 dio-out3 2 dio-in3 3 dio-out2 4 dio-in2 5...

  • Page 13

    Feb-9455 user’s manual 13 ide1：hdd ide connector with box-header (2.0mm) pin no. Signal pin no. Signal 1 reset# 2 ground 3 data 7 4 data 8 5 data 6 6 data 9 7 data 5 8 data 10 9 data 4 10 data 11 11 data 3 12 data 12 13 data 2 14 data 13 15 data 1 16 data 14 17 data 0 18 data 15 19 ground 20 nc 21 d...

  • Page 14

    Feb-9455 user’s manual 14 ir1：ir connector with pin-header (2.54 mm) pin no. Signal 1 +5v 2 nc 3 ir-rx 4 ground 5 ir-tx lan：lan connector with box-header (2.0 mm) pin no. Signal pin no. Signal 1 l_mdi0+ 2 l_mdi0- 3 l_mdi1+ 4 l_mdi1- 5 l_p4&p5c 6 l_p7&p8c 7 l_mdi2+ 8 l_mdi2- 9 l_mdi3+ 10 l_mdi3- 11 l...

  • Page 15

    Feb-9455 user’s manual 15 lvds1：lvds panel signal with wafer connector (1.25 mm) pin no. Signal pin no. Signal 1 ground 2 ground 3 l_dc3 4 l_dc3- 5 l_clk0 6 l_clk0- 7 l_dc2 8 l_dc2- 9 l_dc1 10 l_dc1- 11 l_dc0 12 l_dc0- 13 ground 14 ground 15 l_dc7 16 l_dc7 17 l_clk1 18 l_clk1 19 l_dc6 20 l_dc6 21 l_...

  • Page 16

    Feb-9455 user’s manual 16 mio1：multi-io connector with box-header (2.54 mm) pin no. Signal pin no. Signal 1 dcd#4 2 dsr#4 3 rxd#4 4 rts#4 5 txd#4 6 cts#4 7 dtr#4 8 ri#4 9 dcd#3 10 dsr#3 11 rxd#3 12 rts#3 13 txd#3 14 cts#3 15 dtr#3 16 ri#3 17 dcd#2/dt- 18 dsr#2 19 rxd#2/dt+ 20 rts#2 21 txd#2/422r+ 22...

  • Page 17

    Feb-9455 user’s manual 17 mcr1：external keyboard connector with pin-header (2.5 mm) pin no. Signal pin no. Signal 1 ground 2 kdat_con 3 kdat_kbc 4 kclk_con 5 kclk_kbc 6 +5v pwr1：atx 8-pin connector (expansion cable) with pin-header pin no. Signal pin no. Signal 1 +5v 2 +5v 3 5vsb 4 +12v 5 ps_on- 6 g...

  • Page 18

    Feb-9455 user’s manual 18 usb2：usb1 port connector with pin-header (2.0mm) pin no. Signal 1 usb power (+5v) 2 usb data1- 3 usb data1+ 4 ground usb3：usb2, usb3, usb4, usb5 port connector with pin-header (2.0mm) pin no. Signal pin no. Signal 1 usb data2- 2 usb data4- 3 usb data2+ 4 usb data4+ 5 ground...

  • Page 19

    Feb-9455 user’s manual 19 chapter 2 bios setup this chapter introduces bios setup information. Power on or reboot the system board, when screen appear “press del to enter setup“, press key to run bios setup utility. Note: the bios configuration for reference only, may subject to change without prior...

  • Page 20

    Feb-9455 user’s manual 20 2.2 standard cmos features phoenix – awardbios cmos setup utility standard cmos features item help ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help ide channel 0 master [ none ] ide channel 0 slave [ none ] ide channel 1 master [ none ] ide chann...

  • Page 21

    Feb-9455 user’s manual 21 2.3 advanced bios features item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help cpu feature hard disk boot priority virus warning cpu l1 & l2 cache cpu l3 cache quick power on self test first boot device second boot device third ...

  • Page 22

    Feb-9455 user’s manual 22 □ quick power on self test select “quick power on self test” enabled/disabled. □ first/second/third boot device select boot device priority. □ boot other device select “boot other device” enabled/disabled. □ boot up numlock status select key on/off when system boot up. □ ga...

  • Page 23

    Feb-9455 user’s manual 23 2.4 advanced chipset features item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help dram timing selectable cas latency time dram ras# to cas# delay dram ras# precharge precharge delay (tras) system memory frequency system bios cac...

  • Page 24

    Feb-9455 user’s manual 24 □ on-chip frame buffer size select share system memory 1mb or 8mb. □ dvmt mode dvmt (dynamic video memory technology) allowing the system to dynamically allocate memory resources according to the demands of the system at any point in time, that improve efficiency of the mem...

  • Page 25

    Feb-9455 user’s manual 25 2.5 integrated peripherals item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help onchip ide device onboard device super io device watch dog timer select onboard serial port 3 serial port 3 use irq onboard serial port 4 serial port...

  • Page 26

    Feb-9455 user’s manual 26 □ onchip ide device press toset ide and sata device configuration. Item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help ide hdd block mode ide dma transfer access on-chip primary pci ide ide primary master pio ide primary slave p...

  • Page 27

    Feb-9455 user’s manual 27 □ onboard device press to select azalia/ac97 auto/all disabled. Item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help azalia/ac97 audio select phoenix – awardbios cmos setup utility onboard device f5: previous values f6: fail-safe...

  • Page 28

    Feb-9455 user’s manual 28 □ super io device press to select serial, parallel and “pwron after pwr-fail” configuration. Item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help onboard serial port 1 onboard serial port 2 uart mode select x rxd , txd active x i...

  • Page 29

    Feb-9455 user’s manual 29 □ usb device setting press to select usb device configuration. Item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help phoenix – awardbios cmos setup utility usb device setting [enable] or [disable] universal host controller interfa...

  • Page 30

    Feb-9455 user’s manual 30 2.6 power management setup item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help pci express pm function acpi function acpi suspend type run vgabios if s3 resume power management video off method video off in suspend suspend type ...

  • Page 31

    Feb-9455 user’s manual 31 □ pci express pm function press to select “wake-up by lan” enabled/disabled. Item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help wake-up by lan phoenix – awardbios cmos setup utility pci express pm function [ disabled ] f5: prev...

  • Page 32

    Feb-9455 user’s manual 32 □ video off in suspend select video on/off during suspend state. □ suspend type there are two types, stop grant: cpu goes into idle mode during suspend state. Pwron suspend: cpu and system remain powered on during suspend state. □ suspend mode select the time of system inac...

  • Page 33

    Feb-9455 user’s manual 33 2.7 pnp/pci configurations item help ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help reset configuration data resources controlled by irq resources phoenix – awardbios cmos setup utility pnp / pci configurations x [ disabled ] [ auto(escd) ] pre...

  • Page 34

    Feb-9455 user’s manual 34 2.8 pc health status item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help shutdown temperature cpu warning temperature current system temperature current cpu temperature cpu fan speed sys. Fan speed vcore +12 v +1.5 v +1.8 v +5 v...

  • Page 35

    Feb-9455 user’s manual 35 2.9 frequency/voltage control item help menu level ↑↓ ← → :move enter:select +/-/pu/pd:value f10:save esc:exit f1: general help cpu clock ratio spread spectrum phoenix – awardbios cmos setup utility frequency / voltage control f5: previous values f6: fail-safe defaults f7: ...

  • Page 36

    Feb-9455 user’s manual 36 2.10 load fail-safe defaults frequency / voltage control load fail-safe defaults load optimized defaults set supervisor password set user password save & exit setup exit without saving phoenix – awardbios cmos setup utility esc : quit ↑↓ ← → : select item f10 : save & exit ...

  • Page 37

    Feb-9455 user’s manual 37 2.11 load optimized defaults phoenix – awardbios cmos setup utility frequency / voltage control load fail-safe defaults load optimized defaults set supervisor password set user password save & exit setup exit without saving esc : quit ↑↓ ← → : select item f10 : save & exit ...

  • Page 38

    Feb-9455 user’s manual 38 2.12 set supervisor password phoenix – awardbios cmos setup utility frequency / voltage control load fail-safe defaults load optimized defaults set supervisor password set user password save & exit setup exit without saving esc : quit ↑↓ ← → : select item f10 : save & exit ...

  • Page 39

    Feb-9455 user’s manual 39 2.13 set user password phoenix – awardbios cmos setup utility frequency / voltage control load fail-safe defaults load optimized defaults set supervisor password set user password save & exit setup exit without saving esc : quit ↑↓ ← → : select item f10 : save & exit setup ...

  • Page 40

    Feb-9455 user’s manual 40 2.14 save & exit setup frequency / voltage control load fail-safe defaults load optimized defaults set supervisor password set user password save & exit setup exit without saving phoenix – awardbios cmos setup utility esc : quit ↑↓ ← → : select item f10 : save & exit setup ...

  • Page 41

    Feb-9455 user’s manual 41 2.15 exit without saving frequency / voltage control load fail-safe defaults load optimized defaults set supervisor password set user password save & exit setup exit without saving phoenix – awardbios cmos setup utility esc : quit ↑↓ ← → : select item f10 : save & exit setu...

  • Page 42

    Feb-9455 user’s manual 42 chapter 3 drivers installation this chapter introduces driver installation information. Please insert the utility cd to cd-rom drive, the install menu will appear automatically, if the install menu did not list suitable driver of operate system or did not appear automatical...

  • Page 43

    Feb-9455 user’s manual 43 step 2. Read the license agreement and click “yes” to continue step 3. Click “next” to continue.

  • Page 44

    Feb-9455 user’s manual 44 step 4. Click “next” to continue step 5. Click “finish” to complete setup.

  • Page 45

    Feb-9455 user’s manual 45 3.2 intel graphic media accelerator driver step 1. Click “next” to continue step 2. Read the license agreement and click “yes” to continue.

  • Page 46

    Feb-9455 user’s manual 46 step 3. Click “next” to continue step 4. Click “next” to continue.

  • Page 47

    Feb-9455 user’s manual 47 step 5. Click “finish” to complete setup.

  • Page 48

    Feb-9455 user’s manual 48 3.3 lan driver step 1. Click “next” to continue step 2. Click “install” to continue.

  • Page 49

    Feb-9455 user’s manual 49 step 3. Click “finish” to complete setup.

  • Page 50

    Feb-9455 user’s manual 50 3.4 audio driver step 1. Click “next” step 2. Click “finish” to complete setup.

  • Page 51

    Feb-9455 user’s manual 51 appendix-a watchdog the system board provides watchdog function, the super i/o setting step as below. Step 1: cr2d, bit0 →0 (select pin77 to wdto#) step 2: ld8, cr30, bit0 →1 (active wdto#) step 3: ld8, crf7, bit4 →write 0 to clear wdto# status. Step 4: ld8, crf5, bit3 →0: ...

  • Page 53

    Feb-9455 user’s manual 53 value of inversion register: only lower nibble is available for this function. When set to a ‘1’, the incoming/outgoing port value is inverted. When set to a ‘0’, the incoming/outgoing port value is the same as in data register. Value of i/o selection register: only lower n...