1.
● press this button to select light on or off in the displayer. When the light on is light button light set,the icon will be displayed and the indicator light in the displayer will be on. When the light off is set, the icon will be displayed and the indicator light in the displayer will be off. Name...
Remote control ● blow button blow ● + button + ● presetting temperature can be decreased. Press this button, the temperature can be - button - set up, continuously press this button and hold for two seconds, the relative contents can quickly change, until unhold this button and send the order that t...
Off this is an universal use remote controller. If remote controller sends the following three kinds of status that the swing status of main unit will be: when the guide louver start to swing up and down, if turn off the swing, the air guide louver will stop at current position. Which indicates the ...
★ this function indicates that moisture on evaporator of indoor unit will be blowed after the unit about blow function is stopped to avoid mould. 1. Having set blow function on: after turning off the unit by pressing on/off button indoor fan will continue running for about 10 min. At low speed. In t...
Press +and - buttons simultaneously to lock or unlock the keyboard. If the remote controller is locked, the icon flicker for three times. If the keyboard is unlocked, the mark will disappear. 1. Press swing up and down button continuously more than 2s,the main unit will swing back and forth from up ...
If the wireless remote control is lost or broken, please use the manual switch auto mode, but the temperature and fan button. At this time, the unit will run at the to open the panel, the manual switch is on the displayer box. It's a special selective buttonfor the users ,who are not accustomed to t...
