Federal Signal Corporation ES100 Installing Manual - page 3
ES100, ES100-DEU, and ES100-UNI 100 Watt Speakers
3
Unpacking the Kit
Afterunpackingthekit,inspectitfordamagethatmayhaveoccurredintransit.Ifithasbeen
damaged,donotinstallit.Fileaclaimimmediatelywiththecarrier,statingtheextentof
damage.Carefullycheckallenvelopes,shippinglabels,andtagsbeforeremovingordestroying
them.EnsurethatthepartslistedinTable 1areincludedinthepackage.
Table 1: Kit contents
ES100, ES100-DEU, ES100-UNI (Kit Number 8567207)
Qty. Description
Part Number
2
SideMountingBolt,5/16-18,5/8"Long 7007010-10
Mounting the Speaker
MOUNTING PRECAUTIONS: ES100 SERIES SPEAKER WIRES
To avoid reducing the sound output and damaging the speaker, ensure that the
speaker is mounted with the wires protruding from the bottom of the speaker.
MOUNTING PRECAUTIONS: DIRECTION OF SOUND OPENING
To avoid reduction of sound output, ensure that the speaker is mounted with the
sound opening facing directly in the direction intended to warn.
DRILLING PRECAUTIONS
Before drilling holes, check the area into which you plan to drill to ensure you do not
damage vehicle components while drilling. All drilled holes should be deburred and
all sharp edges should be smoothed. All wires going through drilled holes should be
protected by a grommet or convolute/split-loom tubing.
Selectanappropriatemountinglocationthatprovidesbothadequatesupportandsufficient
clearanceforthespeakerassembly.Inaddition,themountinglocationshouldprovide
maximumsignalingeffectivenesswhileminimizingthesoundreachingthevehicle’soccupants.
TheES100Seriesspeakersarecompactspeakersintendedtobemountedwithaseparately
purchasedFederalSignalmountingsystem.Ifthespeakersareinstalledwithanothermounting
system,thesafetyandeffectivenessoftheinstallationmustbecarefullyevaluated.Refertothe
mountinginstructionsincludedwiththespeakermountingsystem.
NOTE: Becauseofthevarietyofvehiclesandpossiblemountingarrangements,installation
detailsandmountingbracketfabricationmustbedeterminedbytheinstaller.