Zp 500 thermal printer quick installation guide fedex ship manager ® software fedex ship manager ® at fedex.Com.
Quick installation guide 2 zp 500 thermal printer your printer kit contains: 1. Thermal printer 2. Thermal labels 3. Zebra ® zp 500 ™ and z4mplus dt ™ fedex shipping system printers mini-cd 4. Usb cable 5. Power cord 6. The clean penn ™ with the clean penn you can preserve print quality and extend p...
Quick installation guide 3 zp 500 thermal printer install the printer labels as indicated in the steps below. The instructions can also be found in the inside of the top of the printer cover. 1. Open the printer by applying pressure to the release levers located on the sides of the printer, toward t...
Quick installation guide 4 zp 500 thermal printer turn off your computer and the printer before connecting the supplied usb cable to a dedicated usb port on the printer. Be sure to thread the usb cable through the strain relief clip before connecting it to the printer. Then connect the usb cable fro...
Quick installation guide 5 zp 500 thermal printer if you previously installed a thermal printer with fedex ship manager at fedex.Com or fedex ship manager software, follow the remove legacy zebra printer driver procedure first. Then follow the install zp 500 thermal printer driver procedure. If you ...
Quick installation guide 6 zp 500 thermal printer 8. Click next to save the printer driver files to the designated directory (e.G., c:\zud4233) or click change to save the printer driver files to another directory. After the printer driver files have been saved to the selected directory, the languag...
Quick installation guide 7 zp 500 thermal printer now that you have installed the zp 500 thermal printer driver, follow the procedure below to complete the setup of your thermal printer driver with the appropriate fedex ship manager ® solution. If you are using fedex ship manager at fedex.Com: 1. Lo...
Quick installation guide 8 zp 500 thermal printer step 6: complete setup (cont.) 5. At the bottom of the screen in the section labeled set default printers, click the printer icon next to the label printer field. Select the zp 500 thermal printer driver you just installed and click ok . 6. Click ok ...
