Feisol CT-3301 User Manual

Summary of CT-3301

  • Page 1

    © feisol inc, usa www.Feisol.Net page 1 of 4 user manual ► feisol ct-3301, ct-3401 and ct-3402 a. Mount and center column installation for exchanging mounts (flat ball-head mount / center column mount / leveling base) on the tripod, unscrew the three counter-sunk screws on top of the mainframe using...

  • Page 2: Www.Feisol.Net

    © feisol inc, usa www.Feisol.Net page 2 of 4 c. Leg extension in order to extend a leg section, turn the twist-lock approximately one half turn in counterclockwise direction. Note: if the twistlock is turned too far, the leg section may fall out and compression rings may become lost or damaged. To f...

  • Page 3: Www.Feisol.Net

    © feisol inc, usa www.Feisol.Net page 3 of 4 e. Ball-head (optional) installation when using the flat mounting plate (pre-installed on models ct-3372 and ct-3472), screw the ball-head into the mounting screw by turning the ball-head clockwise until it fits snugly. Please do not over-tighten. When us...

  • Page 4: Www.Feisol.Net

    © feisol inc, usa www.Feisol.Net page 4 of 4 f. Spike (optional) installation remove the rubber caps on the end of the legs by twisting and working them forward – they fit snugly in order to prevent them from coming off accidentally. After they are removed, a thread is exposed at the tip of the leg,...