FeiYu Tech FY-41AP Lite Installation & Operation Manual - page 16
Other manuals for FY-41AP Lite:
Installation & Operation Manual
of
48
Fyetech Electronics Technology
Page | 15
d)
NOTE:
The Power Manager is NOT rated to supply power to the airplane
servos. To power the servos, use your ESC BEC connected via VIEW A
interface of the FY41AP. We highly recommend to use a +5v to +6v
External BEC (rated for 3A output) plugged through VIEW A interface.
Remember to remove the red wire from your ESC plug if you use an External
BEC
.
e) For Gas or Nitro powered planes, you will require a +5 volt battery
plugged into the RC Receiver. The connecting wire will send +5v power to
the FY41AP (
Warning
: remove the +5v wire from the Power Manager plug
if you use battery power).