Feiyue TDF-2511 User Manual - page 10
10
TDF 2511 Inox
1. FRONT GUARD
2. BLADE
3. GUARD MOUNTING NUT
4. REAR GUARD
5. MOTOR SHAFT
6. MOTOR
7. OSCILLATION KNOB
8. REAR COVER
9. BASE
10. CONTROL SWITCH
11. DECORATIVE PLATE
Assembly TDF-2511 Inox
1. Loosen the Guard Mounting Nut from the Motor Housing.
2. Position the rear guard firmly to the motor housing and then fasten it by turning the guard mounting
nut clockwise tightly.
3. Push the blade onto the motor shaft. Be careful not to bend the fan blades.
4.
Hang the front guard to rear guard with the position fixer provided at the rim of guard. Fix together
with the clips provided
TFF-4011
15. FRONT GUARD
16. FAN BLADE
17. GUARD MOUNTING NUT
18. REAR GUARD
19. MOTOR SHAFT
20. MOTOR HOUSING
21. OSCILLATION KNOB
22. SPEED SWITCH
23. FAN HEAD NECK
24. SECURING KNOB
25. POLE
26. PIPE CONNECTOR
27. LOWER PIPE
28. BASE
Assembly TFF-4011
6. Assembly the stand and main body. Secure screws and make sure it is standing stable on
the floor.
7. Loosen the Guard Mounting Nut from the Motor Housing.
8. Position the rear guard firmly to the motor housing and then fasten it by turning the guard mounting
nut clockwise tightly.
9. Push the blade along motor shaft. Fasten it firmly with the spinner by turning it counter clockwise.
10.
Hang the front guard to rear guard with the position fixer provided at the rim of guard. Fix together
with the clips provided