1. DL manuals
  2. Felix Printers
  3. 3D Printers
  4. Tec 4
  5. Quick Start Manual

Felix Printers Tec 4 Quick Start Manual

Other manuals for Tec 4: User Manual

Summary of Tec 4

  • Page 1

    Quick start guide tec 4 www.Felixprinters.Com/support support@felixprinters.Com zeemanlaan 15 3401 mv ijsselstein the netherlands.

  • Page 2: Safety

    Felixprinters quick start guide for the felix tec 4 general safety keep children under the age of 14 out of reach of the printer. Felixprinters are only suitable for professional use. Considerations when in operation do not lean on the printer. Be careful with long hair and loose clothes. Do not tra...

  • Page 3

    Felixprinters quick start guide for the felix tec 4 thank you for choosing felix tec 4. This quick start guide contains the following information for you to familiarize yourself with your 3d printer, to use it to its best advantages and to benefit fully from all the functions and the technical devel...

  • Page 4: Specs

    Felixprinters quick start guide for the felix tec 4 page 4 felix tec 4 system specifications • printer dimensions (l, w, h) 410 x 450 x 520 mm • weight 9 kg • power requirements: 220 v capabilities • build volume single mode (l, w, h) 205 x 255 x 225 mm • build volume dual mode (l, w, h) 205 x 240 x...

  • Page 5: The Basics

    Felixprinters quick start guide for the felix tec 4 the basics nozzles / extruders flexible buildplate build platform power switch power connection usb computer cable sd card slot filament tubes filament guide thumb screws filament filament spool holder display unit page 5 felixprinters quick start ...

  • Page 6: 1.1 What’S In The Box?

    Felixprinters quick start guide for the felix tec 4 1.1 what’s in the box? *we recommend to use the following tools: spray container with alcohol, paper cloth, scissors and long nose pliers 1 x allen key 2 x spool holder 1 x filament guide 1 x usb-sd adapter 1 x handle cover 1 x usb cable 1 x power ...

  • Page 7: 1.2 Unboxing

    Felixprinters quick start guide for the felix tec 4 1.2 unboxing chapter 1: unboxing page 7 page 7 felixprinters quick start guide for the felix tec 4 open the box, remove the bumper and take out the miscellaneous parts from the bumper. Carefully remove the felix tec 4 from the box. 1 2 2.

  • Page 8

    Felixprinters quick start guide for the felix tec 4 page 8 chapter 1: unboxing remove the foam protection from the printer frame. Remove the five red protective cable ties using cutting pliers or a scissor. 4 5 1 2 3.

  • Page 9: 1.3 Installing The Handle

    Felixprinters quick start guide for the felix tec 4 1.3 installing the handle page 9 chapter 1: unboxing 1. Put the t-nut upright into the t-slot of the profile. 2. Twist the t-nut 90 degrees in place. 3. Repeat this for both t-nuts. 1. Fix the handle against the vertical profile with the two hexago...

  • Page 10

    Felixprinters quick start guide for the felix tec 4 1.4 installing accesoires and cables chapter 1: unboxing page 10 ≈ 12 cm ≈ 20 cm 1. Place the rear of the flexible buildplate on the edge. 2. Lower the front of the flexible buildplate and make sure all edges are inside the build platform. Install ...

  • Page 11

    Felixprinters quick start guide for the felix tec 4 page 11 chapter 1: unboxing e1:190°c e2:190°c b:55°c x: 0.00mm y: 0.00mm z: 0.00mm printer ready rotate the button to navigate push to enter the main menu current temperature extruder 1 extruder 2 build plt. Status 1. Make sure the power switch is ...

  • Page 12: 2.1 Level Build Platform

    Felixprinters quick start guide for the felix tec 4 e1:21°c e2:21°c b:21°c build plt. Levelled correctly >>> ok e1:21°c e2:21°c b:21°c max. 10° turn back: 45° r turn front: 90° l >measure again cancel e1:21°c e2:21°c b:21°c measuring... Please wait... E1:21°c e2:21°c b:21°c back >control print setti...

  • Page 13: 2.2 Calibrate Z-Probe

    Felixprinters quick start guide for the felix tec 4 www.Felixprinters.Com calibration card e1:21°c e2:21°c b:21°c z-probe calibrated! >>> ok e1:21°c e2:21°c b:21°c back >control print settings chapter 2: preparation page 13 2.2 calibrate z-probe enter the main menu by pressing the button, select con...

  • Page 14: 2.3 Change Filament

    Felixprinters quick start guide for the felix tec 4 chapter 2: preparation page 14 2.3 change filament take the filament tubes and push the ends in the filament guide and print-head. These will be used to feed the filament to the print-head take the end of the filament, and create a clean end, by cu...

  • Page 15

    Felixprinters quick start guide for the felix tec 4 e1:21°c e2:21°c b:21°c change filament back >pla petg pv a e1:21°c e2:21°c b:21°c back preheat/cool remove build plt. >change filament level build plt. Chapter 2: preparation page 15 enter the main menu by pressing the button, select control. Scrol...

  • Page 16

    Felixprinters quick start guide for the felix tec 4 3.1 ensure a succesfull print clean nozzles remove plastic residue from the nozzle using the tweezer. Select preheat/cool in the control menu to make the residue soft and easy to remove. Clean build platform degrease the flexible buildplate using a...

  • Page 17: 3.2  Printing Via Sd Card

    Felixprinters quick start guide for the felix tec 4 22 e1:144°c e2:21°c b:39°c benchy single pla 00.0% heating up... E1:21°c e2:21°c b:21°c back benchy dual pla-pla >benchy single pla chapter 3: print page 17 3.2 printing via sd card enter the main menu and select print. Select benchy single pla for...

  • Page 18

    Felixprinters quick start guide for the felix tec 4 3.3 remove a 3d printed object page 18 felixprinters quick start guide for the felix tec 4 page 18 caution: hot! Page 18 chapter 3: print remove the build plate to remove the flexible buildplate lift up the front end using the notch in the build pl...

  • Page 19

    Felixprinters quick start guide for the felix tec 4 page 19 3.4 remove support material chapter 3: print felixprinters quick start guide for the felix tec 4 same material support remove the same material support structures by pull- ing on the endes of the structure that are not connect- ed to the 3d...

  • Page 20: Repertier-Host

    Felixprinters quick start guide for the felix tec 4 page 20 4.1 print your own 3d models chapter 4: software and maintenance page 20 repertier-host for experienced users who love to tweak we also support repertier-host open source 3d software. Www.Felixprinters.Com/repetier-host simplify3d simplify3...

  • Page 21

    Felixprinters quick start guide for the felix tec 4 1 e1:21°c e2:21°c b:21°c back >calibrate xy e all >home all chapter 4: software and maintenance page 21 4.2 calibrate xy offset (dual only) select: control -> calibrate extruders -> cali- brate xy. Choose the beste aligning lines for both the x and...

  • Page 22

    Felixprinters quick start guide for the felix tec 4 e1:21°c e2:21°c b:21°c back >home all ome all home x home y home z >home all chapter 4: software and maintenance page 22 4.3 calibrate z offset (dual only) select: control -> move -> home all. Make sure the build platform is properly levelled and t...

  • Page 23

    Felixprinters quick start guide for the felix tec 4 page 23.

  • Page 24: Review Our Products

    Quick start guide felix tec 4 zeemanlaan 15 3401 mv ijsselstein the netherlands www.Felixprinters.Com/support support@felixprinters.Com review our products help us to improve our products and services. It only takes a few minutes! Www.Felixprinters.Com/survey (a small reward is waiting for you) manu...