Feller EK 60 Instruction Manual - page 4
Using the appliance
Cleaning the appliance
Before first usage, you could clean the surface of your appliance with a
damp soft cloth. For cleaning inside of the unit, fill the water till max. level
and push On/off switch. After the water is boiled, your appliance will cut
off the heating automatically and stop heating process. Pour the boiled
water and shake the inside of the unit with clean unit. Never immerse the
power base, power cord and plug to the water.
Preparing Hot Water:
-
Pour the water as much you need ,But do not exceed the max. level. If
you exceed max level, boiled water can overflow and might give damage
to you.
-
Automatic turn off.!You do not need to interfere the appliance till it
stops operating automatically. However you could stop heating process
manually by pushing switch when the appliance is operating.
-
After the water is boiled, the appliance will cut off heating automatically .
Cleaning the water tank:
First of all,unplug theappliance from the power socket. If the body gets
dirty too much, you could use washing-up liquid to clean it.
While cleaning, do not immerse the power base of the unit to the water.
If the power base (that has electrical circuits under itself) immerses to the
water, this will cause a risk of electrical shock and damage on electrical
circuits.
Even your appliance is protected against overheating; do not turn on your
appliance while there is no water inside.
Do not ever wash your appliance in to the dishwasher or under running
water.
You could not wash inside of the body under running water and do not
ever immerse the power base (that has electrical circuits under itself) of
the unit in the water. You could clean the body surface of the unit with a
damp cloth.
4