Feller PJB 100 Instruction Manual - page 4
3
BLENDER USE
GRINDER & MINCER USE
1.
According to the arrow direction on the body, put the mug on the
body, making the three holes under the mug fix rightly to the fixers
on the body, then roll 30° triangle by clockwise. The blender is already
assembled.
2.
Turn the switch button to “0” and collect to the rated power.
3.
Put the for-processed vegetables or fruits into the mug, covered and
switch on, and then begin to work.
4.
The for-processed vegetable or fruits should be cut in piece of 2×2 cm.
5.
If you want to see the blending process or adding vegetable or fruits,
just open the top cover.
6.
When finish, switch off and pull out the power plug. Roll 30° triangle
by anti-clockwise according to the illustration to take off the mug, then
transfer the juice to another ready container. The cover, mug can be
washed with water. The body only can be cleaned with wet cloths. The
blade can be disassembled to wash with water, but be careful when
disassemble it, it suggests that encasing a piece of cloths to disassemble
it by anti-clockwise.
7.
Select the different speed according to the processing capacity. Speed
‘1’ for Low speed, speed ‘2’ for high speed, “P” for pulse function.
8.
Processing the hard food, such as soybean. It suggests that dunking the
soybeans for sometimes and then processed.
1.
Fill materials into the grinder cup, press the grinder cup downward,
making sure that pins of grinder cup can fit the four grooves on the
grinder base, and then turn the cup clockwise to fix it.
2.
Take off the glass mug from the body, install the grinder attachment,
making sure the gear under the mug fix rightly to the transmission gear
on the body
3.
Press “PULSE” button for 3-5 times for pre-grinding, and then choose
speed “1”, or “2” to process, user should choose different speeds
according to material quantity and type, speed “1” for few quantity and
soft materials, speed “2” for hard materials and much quantity.
4.
When finish, switch off and pull out the power plug.