Feller RC 71 User Manual - page 34
13
2.
Connect to power source, press “MENU” key to
select quick function.
3.
Press“PRE-SET”key to set the finished time of
cooking.
Function
The beginning of heating time
Regular
minutes before the set finished time 60
Quick/small amount minutes before the set finished time 50
Steam/soup
Before the set cooking time
y
“Pre-set”word on the right of LCD flash.
y
The LCD display the default finished time of this function.
4.
Press“HRS”“MIN”key to adjust finished time to 11:30.
“HRS”key in the unit of 1 hour, “MIN”key in the unit of 1 minute increase.
5.
Press “START/REHEAT”key, the right side of LCD displays “pre-set”word,
and the word switch from flash to light up, the LCD display present time.
The cooker start to time, and when timing to the set time, the LCD does
not display“pre-set”word, the cooker start to heat, enter into cooking
process of selected function.
You can press“PRE-SET”key to view the set preset time during timing
process, it will return to display present time after 5 seconds.
If the preset time is shorter than the required total cooking time of the
selected function, press “START/REHEAT”key, the cooker start to heat
immediately.
DEALING WITH POWER CUT
Preset
Reheating
Keep warm
Power off
More than two hours Less than two hours
E5 error will occur,
press “Off”
key to enter waiting
mode, then
reset the time.
Continue to time if it does
not arrive at the set time
Start to cook immediately, if
it is over the set time.
Continue to cook
Continue to keep warm