Fellowes C-420Cx Instructions Manual - English
ENGLISH
Model C-420Cx
4
Should you choose to disable
the system, press and hold
the bulldog and reverse ( )
key at the same time
dISABLING THE FEATURE
Oncedisabled,theblue
Auto light is no longer
illuminated (To re-engage,
repeat step 1)
If jam occurs, press and
hold forward ( ) key until
the document is completely
through the shredder
If not cleared, press
reverse ( ) briefly
(repeat steps 4 and 5
until shredded)
REFILLING THE OIL
Low oil indicator will
signal when your reservoir
needs refilling
To maintain shredder
performance, refill oil
reservoir with up to
355 ml. of shredder
oil (Fellowes 35250)
Oncerefilled,automatic
oiling will resume
Lift CD flap to clearly
see cutters
Press the bulldog and
forward keys at the
same time
CLEARING THE OIL NOZZLES
Oilwillsprayoutofthe
nozzles confirming that they
are working properly
dISABLING THE FEATURE
Should the SafeSense
®
indicator stay lit without
touching the opening
The shredder will stop and
SafeSense
®
will need to be
deactivated
To deactivate, shift override
switch to the “not active“
position
Oncedeactivated,the
indicator will flash and
the SafeSense
®
feature
will not function
To clear paper, press
and hold forward key
until paper is shredded
Oncethepaperiscleared,
reactivate the SafeSense
®
feature (To re-engage,
seeOperations)
If steps 4 and 5 do not clear
jam, reverse paper all the
way out, remove several
sheets and refeed
1
2
1
AUTO
2
3
4
5
6
1
3
2
4
5
6
•Allcross-cutshreddersrequireoilforpeakperformance.Ifnotoiled,amachinemayexperience
diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. We
recommendthatyourefilltheAutoOilreservoirasinstructedtoavoidperformanceproblems.
•Ifshippingshredder,oilmustbedrained.Openoilreservoir,pulloutbaskettoaccessoildrainplug.
Holding suitable container under drain, remove plug and let oil drain out. Replace plug.
AdvANCEd PROdUCT FEATURE MAINTENANCE ANd TROUBLESHOOTING
AUTO OIL
Automatically oils the cutters to enhance performance and extend shredder life.
SAFESENSE
®
TECHNOLOGY
Stops shredder immediately when hands are too close to the paper entry.
1
2
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
JAM PROOF SYSTEM*
Shredding can continue with
the system disabled, however a
paper jam may occur with too
many sheets and Remove
Paper icon ( ) will illuminate
*100% Jam Proof when used in accordance with user manual