Fellowes POWERSHRED 69Cb User Manual - Basic Shredding Operation
BASIC SHREddING OPERATION
JAM BLOCKER SYSTEM OPERATION
Blocks jams before they start.
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
BASIC PROdUCT MAINTENANCE ANd TROUBLESHOOTING
Allcross-cutshreddersrequireoilforpeakperformance.
If not oiled, a machine may experience diminished sheet
capacity, intrusive noise when shredding and could ultimately
stoprunning.Toavoidtheseproblems,werecommendyou
oil your shredder each time you empty your waste bin.
OILING SHREddER
FOLLOW OILING PROCEdURE BELOW ANd REPEAT TWICE
alt
2
*Apply oil across entry
SettoOff
alt
3
SAFESENSE
®
TECHNOLOGY OPERATION
SET-UP ANd TESTING
PressAutoOn( )
Touchtestareaand
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
alt
1
alt
1
alt
2
alt
4
If hand is held on SafeSense
®
area more than 2 minutes
shredder will shut off
Indicator lights:
Wait 20 minutes for motor to cool down
Make sure bin is pushed in
Remove paper
Yellow - SafeSense
®
active
alt
alt
3
Press and hold Reverse
(
) 2-3 seconds
www.fellowes.com features an extensive on-line support section with a number of self-service options
alt
alt
alt
PressAutoOn( )
to activate
Feed paper/card
straight into paper
entry and release
When finished
shredding set
toOFF
PAPER/CARd
Plug in and put
disconnect power
switchinON(I)position
2
1
3
4
Continuous operation: 10 minutes maximum
NOTE: Shredder runs briefly after each pass
to clear entry. Continuous operation beyond 10
minutes will trigger 20-minute cool down period.
alt
2
Paper jam: Shredder will
automatically reverse the
paper out for easy removal
Reducepaperquantity
to an acceptable
amount and refeed
into paper entry
alt
3
alt
1
If Remove Paper icon ( )
is illuminated, there is too
much paper for the shredder
to power through
alt