Fellowes POWERSHRED 70S Manual - Basic Shredding Operation
12
12
PS-77Cs
14
14
14
14
14
12
70S
70S
70S
12
14
70S
12
14
70S
12
14
70S
70S
70S
70S
12
14
70S
12
12
PS-77Cs
14
14
14
14
14
12
70S
70S
70S
12
14
70S
12
14
70S
12
14
70S
70S
70S
70S
12
14
70S
Feed paper straight into
paper entry and release
or
4
Feed into card/CD
entry and release
When finished
shredding set
to OFF (O)
6
5
Gently pull uncut
paper from paper
entry. Plug in.
12
12
PS-77Cs
14
14
14
14
14
12
70S
70S
70S
12
14
70S
12
14
70S
12
14
70S
70S
70S
70S
12
14
70S
2
Press Auto-On (I)
PAPER OR CD/CARD
BASIC SHREDDING OPERATION
1
Check paper amount
3
Plug in and put
disconnect power
switch in ON (I) position
Continuous operation:
10-12-minute maximum
NOTE:
Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
10-12-minutes will trigger
20-minute cool down period.
12
14
70S
5
1
Press and hold
Reverse (R)
PAPER JAM
2
Alternate slowly back and forth
3
6
Press and hold
Reverse (R)
Set to Off (O)
and unplug
4
TROUBLESHOOTING
A. Overheat Indicator:
When the Overheat Indicator is illuminated, the shredder has exceeded its maximum
operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will
not operate for the duration of the recovery time. See Basic Shredding Operation for more information
about the continuous operation and recovery time for this shredder.
B. Bin Open:
The shredder will not run if the bin is open.
When illuminated, close the bin to resume shredding.
C. Remove Paper:
When illuminated, press reverse (R) and remove paper.
Reduce paper quantity to an acceptable amount and refeed into paper entry.
A
B
C