Fellowes POWERSHRED DS-1200Cs Instructions - Basic Shredding Operation
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
12
DS-1200C
BASIC SHREDDING OPERATION
2
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
15
15
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
BASIC PRODUCT MAINTENANCE
Allcross-cutshreddersrequireoilforpeakperformance.
If not oiled, a machine may experience diminished sheet
capacity, intrusive noise when shredding and could ultimately
stoprunning.Toavoidtheseproblems,werecommendyou
oil your shredder each time you empty your waste bin.
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
*Apply oil across entry
Set to Off (0)
3
SAFESENSE
®
TECHNOLOGY OPERATION
SET-UP AND TESTING
Set to Auto On (I)
Touchtestareaand
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
12
DS-1200C
12
DS-1200C
1
1
2
4
If hand is held on SafeSense
®
area more than 2 seconds
shredder will shut off
LIMITED PRODUCT WARRANTY
Indicator lights:
Wait
30
minutes for motor to cool down
Yellow - SafeSense
®
active
alt
3
Set to Reverse (R)
2-3 seconds
LIMITED WARRANTY Fellowes, Inc. (“Fellowes”) warrants the cutting blades of the machine to
be free from defects in material and workmanship for 5 years from the date of purchase by the
original consumer. Fellowes warrants all other parts of the machine to be free of defects in material
and workmanship for 1 year from the date of purchase by the original consumer. If any part is
found to be defective during the warranty period, your sole and exclusive remedy will be repair or
replacement,atFellowes’optionandexpense,ofthedefectivepart.Thiswarrantydoesnotapply
incasesofabuse,mishandling,orunauthorizedrepair.ANYIMPLIEDWARRANTY,INCLUDINGTHAT
OFMERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE,ISHEREBYLIMITEDINDURATION
TOTHEAPPROPRIATEWARRANTYPERIODSETFORTHABOVE.InnoeventshallFellowesbeliablefor
anyconsequentialorincidentaldamagesattributabletothisproduct.Thiswarrantygivesyouspecific
legalrights.Theduration,terms,andconditionsofthiswarrantyarevalidworldwide,exceptwhere
differentlimitations,restrictions,orconditionsmayberequiredbylocallaw.Formoredetailsorto
obtain service under this warranty, please contact us or your dealer.
www.fellowes.com features an extensive on-line support section with a number of self-service options
12
DS-1200C
12
DS-1200C
Set to Auto On (I)
Feed paper/card
straight into paper
entry and release
When finished
shredding set to
OFF (O)
PAPER/CARD
Plug in and put
disconnect power
switch in ON (I) position
2
1
3
4
Continuous operation: 5 minutes maximum
NOTE: Shredder runs briefly after each pass
to clear entry. Continuous operation beyond 5
minutes will trigger 30-minute cool down period.
alt
TROUBLESHOOTING
Paper jam: Set to Off (O) and empty bin. Replace bin and follow any or all of the below procedures.
Alternate slowly back and forth
Set to Reverse (R)
for 2-3 seconds
Set to Off (O)
and unplug
Gently pull uncut
paper from paper
entry. Plug in.
Set to Reverse (R)
1
2
3
4
5
6