1225hp 1225hp professional professional loudspeaker loudspeaker enclosure enclosure refer refer ence / owner ence / owner ’ ’ s s manual for 1225hp manual for 1225hp p/n 053647 rev a.
Fender musical instruments 7975 north hayden road, scottsdale, arizona 85258 u.S.A. A message from the chairman at fender, we know the importance of sound reinforcement. From the simple box-top powered mixer to today’s touring concert systems, the need to communicate to make the connection between t...
3 3/4” birch plywood construction with sturdy dado joints high current 1/4” phone jacks and neutrik speakon ™ connectors b&c 1” (2.55 cm) exit compression driver active / passive crossover operation metal corners and rubber feet tough indoor / outdoor synthetic carpet covering thank you for purchasi...
Parallel or series are the two basic ways which multiple speakers can be connected to a single power amplifier. When speakers are connected in parallel, their combined impedance decreases. For speakers wired in series the opposite is true, their combined impedance increases. Thus, when speakers are ...
5 to change the dispersion pattern from 90º to 60º, first remove the phillips head screws from the grille and lift the grille away from the cleat. If your insert has a plug on it, you may wish to remove it for easier installation. To do so, carefully cut it off using a razor blade. To attach the hor...
6 a second consideration is for feedback and bass performance. If the speaker is placed near a large, flat wall, the bass output will increase by approximately 3 db. Placing the speaker near a wall can cause feedback. If this occurs, the speaker must be moved. A third consideration is to what degree...
7 low out high out a in a out b out speakers operated in a bi-amp configuration with a subwoofer (tri-amping) a in bridge out bridge mono mode mid out pcn-4 electronic crossover input monitor out main out unpowered mixer b in switches set to external crossover 1225hp cabinet hi hi low low 215s 1225h...
Model 1225 hp part number 071-1225-300 cabinet 3/4" (1.9 cm) birch plywood connections (2) 1/4" phone jacks (2) speakon ™ jacks driver low: 15" (38 cm) cast frame woofer 3" (7.6 cm) voice coil 80 oz. (2.3 kg) magnet 8 Ω high: 1" (2.5 cm) exit throat polymer diaphragm 2" (5 cm) voice coil 16 Ω freque...
