1272x / 1275x loudspeaker monitor systems reference / owner’s manual for 1272x /1275x p/n 053996 rev a.
Fender musical instruments 7975 north hayden road, scottsdale, arizona 85258 u.S.A. A message from the chairman at fender, we know the importance of sound reinforcement. From the simple box-top powered mixer to today’s touring concert systems, the need to communicate to make the connection between t...
3 all wood construction with sturdy dado joints high current 1/4” phone jacks metal corners and rubber feet level control for adjusting levels at the cabinet three angles of orientation: 30º, 60º and vertical for side fill use tough indoor / outdoor synthetic carpet covering thank you for your purch...
Parallel or series are the two basic ways which multiple speakers can be connected to a single power amplifier. When speakers are connected in parallel, their combined impedance decreases. For speakers wired in series the opposite is true, their combined impedance increases. Thus, when speakers are ...
5 the 1/4" jacks are wired in parallel allowing any one of the jacks to be used as an input and the other as an output. This allows "daisy chaining" of multiple loudspeakers, eliminating the need for several long, cumbersome runs of speaker cable. The connections are as follows: polarity phone jack ...
6 type pr 395 pr 396 model 1272x 1275x part number 071-1272-200 071-1275-200 cabinet 3/4" (1.9 cm) 3/4" (1.9 cm) particle board particle board connections (2) 1/4" phone jacks (2) 1/4" phone jacks drivers low: 12" (30.5 cm) woofer 15" (38 cm) woofer 2" (5.1 cm) voice coil 2" (5.1 cm) voice coil high...
